Topic: Margay size with 150

This topic has 7 replies, 6 voices, and was last updated 12 years, 8 months ago by Grapela08.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
September 19, 2013 at 10:41 pm #275015

michael5000
Participant

Hello,Im trying to determine if a Margay with a 150 will fit in my single garage. The garage is about 8 feet wide and 21 feet deep. Anyone know the measurements for the Margay on a trailer?Thanks!Mike

September 19, 2013 at 11:18 pm #275016

PhilAddison
Participant

The length is likely OK. The width is not. However, BCB can make a narrower trailer if requested, but I dont know what those specs are. Give your local dealer or BCB a ring and see if possible. Good luck!

September 19, 2013 at 11:21 pm #275017

cef1965
Participant

Per BCB web site, minimum storage is 194″ with swing away tongue. W/o a jack plate it is 188″. Would imagine with the JP is with a 150. With a 90″ beam, getting it through an 8 opening may be a challenge.http://basscatowners.yuku.com/topic/262 … juGC9KsjToLast edited by cef1965 on September 19th, 2013, 11:54 pm, edited 1 time in total.

September 19, 2013 at 11:59 pm #275018

polaris425
Participant

Agreed. Length is good w/ swing tongue but, I doubt youll get in at 8 wide. My garage is 213 & my Sabre fits barely w/ motor down and tongue open. But it does fit. So the margay should fit fine w/ a few extra inches to spare.13 PIV w/ 200 MercIG: WarriorRiverCustomRods

September 20, 2013 at 4:13 am #275019

Bass Cat Boats
Keymaster

I didnt know they made a narrower trailer. If that doesnt work I have to store in covered parking for 120 a month. So expensive.

September 20, 2013 at 4:40 am #275020

Bass Cat Boats
Keymaster

Narrow frames are available as are drop back hitches to shorten trailers.

September 20, 2013 at 4:54 am #275021

michael5000
Participant

For a margay what would be the narrow trailer width?

September 23, 2013 at 4:34 pm #275022

Grapela08
Participant

I can tell you it will not be enough. The boat on the trailer is right around 97 inches wide. As far as depth with the motor straight down and turned as far as it will go I am at more like 19,7 with the jackplate on a 150 pro xs with the tongue swung open. I am in my garage by literally an inch, but I am in thats all that matters right.
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic. Login Register