Any opinions?

Sorry your having issues this AM. The controller usually works smoothly other than the decent position on the livewell twist handle. We think it might be the cable loosening on the valve and the cable slipped, which means it wont work properly. On the dash and assembly the touch pad obviously could have moisture with cooler weather and it seems humidity is trapped inside the sealed touch pad. If it works as it should after today we suspect moisture, if not then we suspect the A10 might need a warranty.

Yes, moisture develops where it seems to funnel and usually its the bilge switch. The livewell cable is going to show while twisting the handle and the cable will be seen watching the rear sump area, or checking its position in each direction of throw. Turn it forward and check cable location in the valve clamp bracket, twist it rearwards and look again. You will notice the jacket has moved under the clamp, the cable wont slide in and out of it. Some are plastic cable clamps, and some are metal set in plastic. Either way the plastic moves some and allows it to slip.

If you can, have someone twist it while you are back there watching. It will be easier to see what its doing.

And if you find out its a cable or valve problem, you can contact your dealer or Flow-Rite. I contacted Flow-Rite, it may have been after the Bass Cat warranty expired, the guy I talked to sent a cable and a new valve at no charge. They were very responsive and customer-oriented.