Topic: Pump in / Pump out option

This topic has 5 replies, 2 voices, and was last updated 9 years, 11 months ago by Bass Cat Boats.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
July 3, 2016 at 1:16 pm #286919

highway
Participant

Is it possible to add a pump in / pump out to a Bass Cat that did not come with that option?If it is is it cost effective to have it done?I have a 2016 Cougar Advantage.Thanks,

July 3, 2016 at 1:55 pm #286920

Bass Cat Boats
Keymaster

It is a simple install if you have the grit to cut the holes. The panel is available with two switches and the pumps are easy. Pre-Building the CPVC head for the pump in is suggested by the production department (Boxing) and the hose will be best purchased from BCB due to high volume requirements and quality elsewhere. Hose clamps (4), silicone, two pumps, one thru hull fitting, one CPVC Spray head, wire connectors, wire harness, panel and two switches, 4 screws and 3/4″ reinforced hose. We think thats the build list!

July 3, 2016 at 3:55 pm #286921

Bass Cat Boats
Keymaster

Cutting the holes does not discourage me as long as it is properly sealed there should never be an issue. I have an empty spot on the console where a gauge or the switch could go so there is room. Thanks for the information. Who do I call at BCB to order the materials for the install. Thanks,

July 3, 2016 at 8:28 pm #286922

Bass Cat Boats
Keymaster

We would ask for Richard on this one.

July 5, 2016 at 10:34 am #286923

Bass Cat Boats
Keymaster

Can the pumpout be intergrated with the bilge pumpout right before the exit hole to keep from drilling another with a Y-connector or something like that?Purchased new 5/4/15Bass Cat Sabre Vision EliteMercury Pro XS 150MotorGuide 75lb Tour EditionHumminbird – Stock (will be changing soon I hope)

July 5, 2016 at 12:47 pm #286924

Bass Cat Boats
Keymaster

Not easily as a check valve would be required.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic. Login Register