Specific Equipment List from BCB?

This topic has 8 replies, 4 voices, and was last updated 11 years, 4 months ago by Bass Cat Boats.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
February 7, 2015 at 12:58 pm #290942

dabro
Participant

Can you get a specific equipment list of what was installed in your boat from BCB? The reason Im asking is, on my new to me 14 Puma FTD I updated the firmware on the graphs. Now the setup on the transducers is defaulted to generic ones. How can I tell whats installed on the boat? Im inexperienced with the graphs, thought I had backed up the settings. But in restoring the settings file it still defaults to generic transducers. BTW, the graphs are Simrads but the transducers are Lowrance I believe. The front unit has a transducer mounted on it but there are no labels or tags on the plug end. Id like to get this set up properly with whats there. Thanks

February 7, 2015 at 2:12 pm #290943

Bass Cat Boats
Keymaster

SIMRAD is Lowrances parent sister company of Navico.

February 7, 2015 at 3:35 pm #290944

clownshoes
Participant

I would contact original owner. Probably still has build sheet.C.O.D. Jr. III

February 7, 2015 at 10:03 pm #290945

PhilAddison
Participant

I too would contact the original owner.

February 8, 2015 at 2:58 am #290946

dabro
Participant

Thanks Guys, Ive got the build sheet for the boat, theres just not specific information about the transducers. It has a factory installed through hull transducer in the bow. A factory installed (DI) transducer on the troller. Also a factory installed through hull transducer in the bilge with a temp sensor on the transom. These are checked on the build sheet. My inquiry was if I could come up with the model (part) number of these transducers to set the graphs up with the proper transducer settings. The boat also has an LSS2 HD Structure scan box with transducer. When you set up the transducer for the graph there is a drop down menu with lots of choices of transducers to pick from. I thought maybe BCB had a specific material list for each boat by hull #.

February 8, 2015 at 11:47 pm #290947

Bass Cat Boats
Keymaster

Original owner may be clueless.Console unit should have a PDRT-WBL transducer and the bow unit will have a PDT-WBL or possibly a HDI 50/200 if there is Down Imaging on the trolling motor.

February 9, 2015 at 1:44 am #290948

Bass Cat Boats
Keymaster

Nope, they dont have models of components used on those as in a computer record. There is a tag on the end of the transducer cables that indicates the type and model.

February 9, 2015 at 3:09 am #290949

Bass Cat Boats
Keymaster

Thanks BCB. Kevin you nailed it on the console unit, thanks. I crawled under the console and there was a tag on the transducer lead there. It is a PDRT-WBL transducer. The tag on the bow unit is either gone or down the cable under the glass. By the pictures on the Lowrance site it is either an HDI 83/200, 000-10976-001 or a HDI 50/200, 000-10977-001. Does it hurt the unit or the transducer if you set it for the wrong frequency 83/200 or 50/200? Would it be more likely the 50/200? With help Im going to get this sorted out, thank you.Last edited by dabro on February 9th, 2015, 3:12 am, edited 1 time in total.

February 9, 2015 at 3:43 am #290950

Bass Cat Boats
Keymaster

It will only effect the signal.
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic. Login Register