Owner's Board

Power pole install ??

This topic has 1 reply, 2 voices, and was last updated 15 years ago by Bass Cat Boats.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
June 12, 2011 at 10:28 pm #303704

kb3024
Participant

On the bracket install between motor and hyd jack plate, Do I need a hoist or can I use the hyd jack plate and a board on the floor and install one side at a time (two poles). Other question was what is the best way to run the wires to the bow?Thanks Korey

June 12, 2011 at 11:24 pm #303705

Bass Cat Boats
Keymaster

Use a snake to run down the center of the hull to the bow. You do not need a hoist if you loosen both sides and remove only one side at a time to install the plates. You can use the trim and a block of wood with one side remaining only loose. Just dont turn the wheel and put pressure on the skeg.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats