Owner's Board

2 questions re temp gauage and perko cap on transom

This topic has 1 reply, 2 voices, and was last updated 18 years, 1 month ago by basschaser.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
April 28, 2008 at 1:20 pm #313561

lreddmann
Participant

I have a 332c in console and X125 up front, 332 has temp reading and the x125 doesnt. What is the easiest way to install a temp gauge so I can have temp when I am up front? Also I was waxing the boat this weekend and noticed a perko cap on the passenger side of the splashwell. Is this where hydraulic fluid is added for the trim? Thank you. -lreddmann

April 28, 2008 at 2:21 pm #313578

basschaser
Participant

Perko cap is a fuel tank vent. Temp gauge…if you can hook up a Lowrance.net to the X125 (must have blue connectors on the back) I am not familar enough with it to know. Anyway, if the XZ125 does have the blue connectors then install the network and both units could untilize the same temp gauge. If not then either get a transducer w/ temp sensor in it and then put it on the troller or run a new temp gauge to the unit. There is a pigtail that is used. Judd Lasiter
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats