Topic: Fulton jacks

This topic has 9 replies, 6 voices, and was last updated 10 years, 4 months ago by scubaman154.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
January 23, 2016 at 6:34 pm #342884

Ub2m4
Participant

Tight garage quarters ended up bending shaft on 2013 Sabre. In 2014 a post here stated BC was going to a Fulton XLT is the part number 141132? Is this a upgrade over what I have? My only complaint is it does not turn easily in very tight quarters an I end up dragging and bending. Thanks in advance

January 23, 2016 at 8:52 pm #342907

bwp777
Participant

get the 1 w/ the fatter wheel or double wheel

January 23, 2016 at 10:31 pm #342923

sabreski
Participant

+1 on the xlt with the fatter tire. DO NOT get the double wheel if you need to push around by hand. I just replaced that one on our Malibu it was a pain! The wide single wheel works great.

January 23, 2016 at 11:21 pm #342944

Bass Cat Boats
Keymaster

The f2 single wheel is nice and very heavy duty. Though if yours has the style l8ke my p2 u will have to buy a adapter plate.the one on mine seems like its about to give away if I try to move it much also.2013 PANTERA 2MERCURY 200 PRO XSMINNKOTA 80LB FORTREX25 fury

January 24, 2016 at 3:27 am #342962

Bass Cat Boats
Keymaster

The XLT works much better than the F2 and we had a high wheel failure rate on the F2 also.

January 24, 2016 at 12:50 pm #342979

Bass Cat Boats
Keymaster

Good advise. Does anybody know the parts serial number for the specific XLT. Does BC have them as I do not see them in the catalog?

January 24, 2016 at 1:24 pm #343006

Bass Cat Boats
Keymaster

BCB does stock them and we do think they exchange with the standard Fulton bracket. The F2 also has a different bracket mount.

January 24, 2016 at 2:47 pm #343022

Redngoo
Participant

I have not noticed the xlt single wheel jack is not parts section. Would be nice to know for sure if they are a direct replacement for the standard fulton jack. Mine definitely need replacing also.Last edited by Redngoo on January 24th, 2016, 2:49 pm, edited 1 time in total.2013 PANTERA 2MERCURY 200 PRO XSMINNKOTA 80LB FORTREX25 fury

January 24, 2016 at 7:37 pm #343055

Ub2m4
Participant

BCB thanks for your help. Do I get the weld on or the bolt on XLT?

January 25, 2016 at 4:32 am #343074

scubaman154
Participant

just a tip ive learned -lower the jack all the way down and this will prevent bending as well as making it easier to maneuver even a tandem axle
Author

Posts

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic. Login Register