Topic: Question for P3 Owners

This topic has 4 replies, 4 voices, and was last updated 12 years, 3 months ago by jagzz4.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
March 8, 2014 at 6:41 pm #343015

jagzz4
Participant

Looking at a 98 Pantera 3 WITHOUT a swing away tongue trailer. Does anyone know the length motor to tongue on this model? I am wanting to know if this will fit in my garage. My garages depth is 23 ft and only have room for a slight angle. (It is a 3 car garage with three separate doors). Any insights would be much appreciated.

March 8, 2014 at 11:43 pm #343031

Phil Bangert
Participant

Width of garage door?

March 9, 2014 at 12:11 am #343045

toledobasser
Participant

My neighbor has a P3 without a swing away tongue and a Mariner engine. I took a rough measurement in his shed. It looked to be about 238″ with the engine down but turned straight. Its now raining but I can try to get a better measurement with the engine turned and see if it will help shorten the length any.Jim EbarbMany, LA (Toledo Bend Lake)2004 Cougar/ 225 OptimaxHumminbird Helix 12 Chirp SI on BalzOut Mount at bowLowrance HDS 7 at bowHumminbird Helix 12 Mega SI on Ram Mount at ConsoleLowrance HDS 8 in dash at console

March 9, 2014 at 2:09 am #343064

jignpig
Participant

You CAN get a retro fit swing away tongue added. You can buy the brackets and design from the factory and take it to a reputable welding shop. I added a swing away tongue to my trailer and what a difference……. Just another thought.Also, is the trailer a single axle or tandem? Single axle would be able to be angled in a little easier……..96 Eyra/12 Mercury 175 Pro XS with 2015 single axle trailer2017 Victory Gunner

March 9, 2014 at 3:58 pm #343078

jagzz4
Participant

Thank you guys so much. Garage width at entry is 100 inches. It is one large garage just three separate doors so should be fine to angle a few inches if needed. Just like to always back in and be done with it. Thanks again for the help. Toledo if you get any other exact measurements some time let me know.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic. Login Register