Owner's Board

Removing built in tackle trays

This topic has 4 replies, 3 voices, and was last updated 15 years, 8 months ago by dperrotte.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
September 28, 2010 at 11:18 am #351717

dperrotte
Participant

Hi, I just got a new to me 2008 Puma. In each compartment on the sides of the net holder, there is a built in Plano box holder. Each one holds 4 boxes. I want to take them out but they seemed to be adhered pretty well. Has anyone removed them. What is the best way? Thanks

September 28, 2010 at 11:26 am #351721

Bass Cat Boats
Keymaster

They are glued down pretty good, but just keep pulling one side or the other and it will give.

September 28, 2010 at 1:38 pm #351724

Bass Cat Boats
Keymaster

There really isnt a way to keep your tray in tact as you take it out. They are put in with urethane.&nbsp Try using a heat gun on the four corners to soften the adhesive and slowly pull them out or use a wood chisel to wedge them out. You can see the corner pads in the tray. BCB AdminLast edited by Bass Cat Boats on September 28th, 2010, 11:40 pm, edited 1 time in total.

September 28, 2010 at 11:23 pm #351728

muddog
Participant

if you have access to a heat gun, or high powered hair dryer thats how i removed them from my 2009 puma (i used the heat gun)

September 29, 2010 at 1:07 am #351732

dperrotte
Participant

Got them out. Just used a pry bar and slid it underneath. came out in one piece. Thanks for the info.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats