Owner's Board

Master switch for power pole

This topic has 5 replies, 3 voices, and was last updated 9 years, 2 months ago by BamaCat.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
March 19, 2017 at 1:58 am #369453

Mainliner61
Participant

Does a master power switch come with a new power pole blade? I have a master that BCB installed for the one blade I have now. Im adding another blade so was wondering if it will come with a switch. If not, will one pole not being on a master switch cause a problem as long as shut of the main power switch?

March 19, 2017 at 3:31 am #369456

Bass Cat Boats
Keymaster

Just wire the new pole into the same master. You may have to verify the breaker amperage is adequate.

March 19, 2017 at 12:26 pm #369458

Bass Cat Boats
Keymaster

I will have to splice into the wires going to the switch for the existing pole. There is no more room on the switch. Assuming thats ok?

March 19, 2017 at 1:54 pm #369460

Bass Cat Boats
Keymaster

The switch will handle the load, and you can get piggyback connectors also.

March 19, 2017 at 2:08 pm #369463

Mainliner61
Participant

Didnt think about the piggybacks. Thanks

March 20, 2017 at 12:40 pm #369466

BamaCat
Participant

I used this main power buss for Talons and it works great. Kills all the power to everything without any additional switched. I did used the quick disconnect plugs between the Talons and the main buss so if I needed to remove/disconnect the Talon I could do so with having to disturb the buss connections.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats