Topic: WHERE YOU GUYS MOUNTING YOUR LSS1 OR LSS2 TRANSDUCERS

This topic has 8 replies, 6 voices, and was last updated 13 years, 3 months ago by kent7351.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
March 1, 2013 at 2:38 am #411689

DOUGMCGEEP3
Participant

thinkin of a hds 8 or 10 for the 05 cougar ftd. where you guys mounting the lss1 or lss2s

March 1, 2013 at 2:54 am #411694

dropshot85
Participant

I have the detwiler jackplate, and i mounted my xducer to the bottom edge of the plate that mounts to the transom. Starboard side. There was a hole already there. Im pretty sure that is where I mounted it, then again the boat is in storagefor a few more weeks.

March 1, 2013 at 1:52 pm #411697

mike dominick
Participant

March 2, 2013 at 12:26 am #411702

DOUGMCGEEP3
Participant

THANKS FELLAS !!!!!!!!!! Ordered a hds 10 with lss1 setup last nite. Ordered me a bracket from sherm. Now I will put my x28hd up front

March 2, 2013 at 1:04 am #411703

Guest
Participant

Drilled and tapped the SM jackplate for 6MM SS screws, filled the holes with 3M 5200, and installed a SS Transducer Shield and Saver Spring Bracket and included accessories.

March 2, 2013 at 1:11 am #411704

Guest
Participant

I wanted to post photos of the complete install I just completed on my Sabre FTD for an HDS-8 Gen 2 w Structure Scan. Unfortunately, the HDS-8 shipped with a dead NMEA 2000 port, so its headed back to the factory (for $34.00 out of my pocket) to be repaired or replaced. Not a happy camper at this point, but what can I do but wait to get it back. Ill post complete photos later this month. Turned out better than I anticipated after I figured out where to install the Ram Mount on the console.

March 12, 2013 at 12:51 pm #411707

DOUGMCGEEP3
Participant

WHERE YALL GET THOSE BLACK BRACKETS TO MOUNT THEM TO JACKPLATE

March 12, 2013 at 1:06 pm #411710

Andrew Winkle
Participant

Those appear to be Transducer Shield & Saver brand brackets. BCB has them for sale on their parts/accessories page or you can order from any place like Tackle Warehouse, Bass Pro, Cabelas, etc. I mounted mine to the jackplate as well. Simple and clean install to say the least.

March 12, 2013 at 1:18 pm #411712

kent7351
Participant

Hey period, what the heck kind of transducer is that? Looks like its about 8 inches long???
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic. Login Register