Owner's Board

Aerator pump not working

This topic has 3 replies, 4 voices, and was last updated 8 years, 1 month ago by JEH in La.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
April 30, 2018 at 9:31 pm #428202

Hookset
Participant

This is on an 07 puma..Cartridge was bad so I replaced it. Had to test it on a different pump because I have no power at the pump, but have power coming to the switch. My questions are how hard is it to check for power leaving the switch, and is it possible to change out the switch on the touch pad if it is the switch? Thanks in advance.

May 1, 2018 at 1:51 am #428204

Bass Cat Boats
Keymaster

You need current to test the switching as they won’t often work without power coming through it.

May 2, 2018 at 2:52 pm #428205

Jones TrollingMotor
Participant

If you have the A10 panel, before going much farther take each ground wire off the ground strip located inside, starboard side on the transom. Yes, I know they look clean but take each off and clean them anyway. needs to be a regular maintenance item to keep the A10 working properly.

May 2, 2018 at 5:20 pm #428206

JEH in La
Participant

Here is another thread similar to yours. Its on this same page. See the links for information.no-recirc-on-a10-t38335.html
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats