Hey Guys,The windshield wraps are not hard to install. You just need to make sure you have the correct tools and TAKE YOUR TIME.DO NOT use windex or any soap & water mixture THIS IS NOT A WET APPLICATION. Make sure you clean the windshield and your hands with Isopropyl Alcohol. Do not use anything else.Its actually easier if you leave the windshield on the boat and remove half the screws before you start. This way, its a one person project and will stay put when your working on it. If you take it off the boat, youll need help holding it. Work down to the screws all the way around and then remove the windshield. Finish the wrap to the edge and trim. Use the alignment line/marks to get it straight, follow the BassCat instructions and you should be good to go.