Topic: Power shutting down

This topic has 9 replies, 5 voices, and was last updated 11 years, 10 months ago by downislandliving.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
June 18, 2014 at 1:47 am #434350

Monsterfishin
Participant

I have a 2008 P2 and every now and then the graph would shut off when running the lake but lately Ive had all the power shut down a couple of times in various situations and I had to wait for something to reset before I could turn things back on. Any ideas what might be going on?Thanks!

June 18, 2014 at 1:55 am #434351

Bass Cat Boats
Keymaster

Bad connection at the battery. Bad circuit breaker. Loose connection at master power switch.

June 18, 2014 at 2:08 am #434352

Bass Cat Boats
Keymaster

Be sure to track all of the connections. It also could be a sliding battery.

June 18, 2014 at 2:42 am #434353

Sparker
Participant

Check the crimp at the connectors, I had one loosen and the wire had slid almost completely out.

June 25, 2014 at 12:02 pm #434354

Bass Cat Boats
Keymaster

Thanks Guys!Ive checked out everything that I could but found nothing. A buddy of mine has a classic and said he had the same problem and that it was the A10 keypad. Does this make since?

June 25, 2014 at 12:38 pm #434355

Bass Cat Boats
Keymaster

It is not related to the A10 dash assembly as all those connections are separate. BCB

June 25, 2014 at 1:15 pm #434356

5 keepers
Participant

How old are your batteries?

June 25, 2014 at 2:05 pm #434357

Bass Cat Boats
Keymaster

When the power shut off it turned off my nab lights and dash lights also. What is having to reset before I can turn everything back on?The battery is a brand new interstate battery. Its a 31

June 25, 2014 at 3:35 pm #434358

Bass Cat Boats
Keymaster

Its a ground issue on the terminal block we believe.

July 28, 2014 at 6:00 pm #434359

downislandliving
Participant

Bass Cat Boats wrote:Its a ground issue on the terminal block we believe.I am having close to the same issue, when i start my engine my bow unit will restart, it has done it with two different units. if it is a terminal block ground issue, how do o remedy that?
Author

Posts

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic. Login Register