Owner's Board

Problem replacing a Fulton side mount jack with a Fulton XLT jack

This topic has 2 replies, 3 voices, and was last updated 7 years, 9 months ago by Bass Cat Boats.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
September 14, 2018 at 9:35 pm #463975

Chicagobass
Participant

Anybody have a clearance problem when replacing a standard side mount jack with a Fulton XLT jack? Yesterday I replaced mine on a 2008 Sabre w dual axle trailer and its bumping the rub rail. The handle will still turn but it is about 1/8 to 1/4 ” too tall. The boat appears to be all the way up on the trailer with about 3″ from the 1st bow roller to the bow hook. Any thoughts?
Thanks
-Bob

September 14, 2018 at 11:27 pm #463976

Redngoo
Participant

I made the swap on my 13 p2 when bcb first started offering the xlt. Swap happened without any problems. Plenty of cleareance these are great jacks. Maybe bcb will cue in. This is the first time ive heard of this

September 15, 2018 at 1:55 am #463977

Bass Cat Boats
Keymaster

We don’t know the clearance issues as we have not installed them on 2008 and the jack location is most likely the issue. We don’t cross over the jacks and there is no way to know if they fit. Your answer might be another Plate on the frame or doubling up plates.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats