Owner's Board

Pump wiring

This topic has 4 replies, 3 voices, and was last updated 6 years, 9 months ago by Bearkat.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
September 2, 2019 at 3:16 pm #677488

Bearkat
Participant

I was messing with my pump in pump and noticed that all the pumps are wired black to black/brown to brown or green except the recirculating pump. It is wired black to green and brown to black. Naturally it rotates in the opposite direction of the others. Is this correct?

September 4, 2019 at 6:16 am #677540

Bearkat
Participant

Can someone look at their wiring for me or let me know which direction the recirc pump should rotate? Thanks

September 4, 2019 at 6:39 am #677541

Cajunhunter67
Participant

If you have a volt meter, power should go to the black and brown wires of the pump the same on all pumps.

I believe the Brown pump wire is power. Black is ground. Spinning the pump in reverse will not pump properly. The impeller is made to pump one way.

September 4, 2019 at 6:40 am #677542

Bass Cat Boats
Keymaster

That pump is wired backwards no matter where it was done. If we did it we apologize for the issue. The wires do need reversed.

September 4, 2019 at 2:53 pm #677570

Bearkat
Participant

Thank you BCB! I doub’t y’all did it. The boat is an ’08 that I bought two years ago. I’ll correct the wiring and I bet I significantly improves the spray when using recirc.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats