Topic: livewell pump issue

This topic has 3 replies, 3 voices, and was last updated 3 years, 4 months ago by mgilg.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
January 23, 2023 at 11:22 am #708703

mgilg
Participant

I have a 2018 Eyra and I had a new issue come up yesterday that hopefully someone can help me with. When I went to fill my livewells I turned on both the pump in and the regular aerator pump to get a faster fill. Once both were turned on, they shut off. I could run one at a time but not both. Later I was running the recirculating aerator pump and it would shut off on its own every 30 minutes or so. I didn’t have any problems with any of the lights or accessories on the panel. Thanks.

January 25, 2023 at 8:18 am #708771

Bass Cat Boats
Keymaster

That’s a new one, check the terminal block for corrosion.

Everyone mentions the terminal block for using some other part. It’s like the battery terminal point on your vehicle, corrosion happens, it’s just where it happens in electrical. Keep those areas it occurs clean and maintained.

January 25, 2023 at 10:39 am #708772

catdude28
Participant

Bass Cat Boats:

That’s a new one, check the terminal block for corrosion.

Everyone mentions the terminal block for using some other part. It’s like the battery terminal point on your vehicle, corrosion happens, it’s just where it happens in electrical. Keep those areas it occurs clean and maintained.

My first thought also was to remove and clean each connection on the terminal block. Use some dialectric grease when you reconnect. Before you even do that, it would also be worthwhile to re-boot the A-10 if you have not already tried that. Just unplug it from behind for a couple of minutes.

January 25, 2023 at 11:34 am #708776

mgilg
Participant

Thanks guys. I’ll give that a shot.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic. Login Register