Bass Cat | 02JagCat | Activity https://forumtesting.basscat.com/members/02JagCat/activity/ Activity feed for 02JagCat. Fri, 29 Dec 2023 21:08:04 -0600 https://buddypress.org/?v=11.3.1 en-US 30 hourly 2 d6ec62b884d307190ad9a5b31ca60e43 02JagCat posted an update: I would imagine it's a #2 square drive. BCB has been using […] https://forumtesting.basscat.com/activity/p/31746/ Thu, 31 Aug 2023 19:13:21 -0600 I would imagine it’s a #2 square drive. BCB has been using them forever.

]]> 0 f04cd5a065d65d52eee2241f3e6a9d9a 02JagCat replied to the topic size of screw and kind that secures the rod holders in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/size-of-screw-and-kind-that-secures-the-rod-holders/#post-718817 Thu, 31 Aug 2023 19:13:20 -0600 I would imagine it’s a #2 square drive. BCB has been using them forever.

]]> 0 19ab007b886e7e031d852cd4936b7f20 02JagCat replied to the topic Low Reserve Oil in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/low-reserve-oil/#post-709523 Tue, 28 Feb 2023 12:34:05 -0600 Don’t think you have a battery problem. Mercury motor? Check the oil level in the engine mounted oil tank. If it’s full, unplug the wires from the level sensor on the tank and jumper the two wires together on the harness (motor side) of the wiring. If the alarm goes away you have a sensor / oil tank problem. The sensor can be checked with multimeter.

]]> 0 19ab007b886e7e031d852cd4936b7f20 02JagCat posted an update: Don't think you have a battery problem. Mercury motor? Check […] https://forumtesting.basscat.com/activity/p/27289/ Tue, 28 Feb 2023 12:34:05 -0600 Don’t think you have a battery problem. Mercury motor? Check the oil level in the engine mounted oil tank. If it’s full, unplug the wires from the level sensor on the tank and jumper the two wires together on the harness (motor side) of the wiring. If the alarm goes away you have a sensor / oil tank problem. The sensor can be checked with multimeter.

]]> 0 62fe9ba98a91a534c958bfe053c82095 02JagCat replied to the topic New gauges? in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/new-gauges-2/#post-708882 Wed, 01 Feb 2023 12:21:36 -0600 I had the same problem several years ago with my Smartcraft SC1000 gauges. I took the gauges apart and removed the inner lens, which is what fades, and haven’t had any problems since. Real easy to do.

]]> 0 62fe9ba98a91a534c958bfe053c82095 02JagCat posted an update: I had the same problem several years ago with my Smartcraft […] https://forumtesting.basscat.com/activity/p/26906/ Wed, 01 Feb 2023 12:21:36 -0600 I had the same problem several years ago with my Smartcraft SC1000 gauges. I took the gauges apart and removed the inner lens, which is what fades, and haven’t had any problems since. Real easy to do.

]]> 0 95d9611dad27207e302b46a2c9625c9b 02JagCat replied to the topic Lucent/marker lights for trailer in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/lucent-marker-lights-for-trailer/#post-707746 Thu, 03 Nov 2022 11:21:03 -0600 Since you still have turn, brake and backup lights, the ground is good. The problem sounds like it is between the tow vehicle and trailer. Check the plug on the truck with a meter or test light and go from there. Check all fuses?

]]> 0 95d9611dad27207e302b46a2c9625c9b 02JagCat posted an update: Since you still have turn, brake and backup lights, the […] https://forumtesting.basscat.com/activity/p/25892/ Thu, 03 Nov 2022 11:21:03 -0600 Since you still have turn, brake and backup lights, the ground is good. The problem sounds like it is between the tow vehicle and trailer. Check the plug on the truck with a meter or test light and go from there. Check all fuses?

]]> 0 b067ddf58d1b8f9cec58595d0d51869c 02JagCat posted an update: Not sure if you still need them but I finally got a chance […] https://forumtesting.basscat.com/activity/p/18423/ Sun, 04 Jul 2021 12:47:41 -0600 Not sure if you still need them but I finally got a chance to grab a couple pics. Most of the hardware I got was for installing the seats to a seat pan. For my Jag all I needed was the 8 sheet metal screws. One screw into each hinge and two screws through the back of each seat.

]]> 0 115871b0dbfaf5f0aa68fd8df36cbf70 02JagCat replied to the topic Boat Seats in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/boat-seats-3/#post-699498 Sun, 04 Jul 2021 12:47:40 -0600 Not sure if you still need them but I finally got a chance to grab a couple pics. Most of the hardware I got was for installing the seats to a seat pan. For my Jag all I needed was the 8 sheet metal screws. One screw into each hinge and two screws through the back of each seat.

]]> 0 05f490264db3b974747b6a99b738beb0 02JagCat replied to the topic Boat Seats in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/boat-seats-3/#post-699461 Wed, 30 Jun 2021 13:57:59 -0600 Don’t have any pictures handy at the moment, but I did my Jag a while back. If you got the same hardware that I received you don’t use anything but the sheet metal screws. I can try and get a few pics after work if I remember.

https://basscat.com/forum/groups/basscatowner/bench-swap-to-buckets-question/#post-673733

]]> 0 05f490264db3b974747b6a99b738beb0 02JagCat posted an update: Don't have any pictures handy at the moment, but I did my […] https://forumtesting.basscat.com/activity/p/18391/ Wed, 30 Jun 2021 13:57:59 -0600 Don’t have any pictures handy at the moment, but I did my Jag a while back. If you got the same hardware that I received you don’t use anything but the sheet metal screws. I can try and get a few pics after work if I remember.

https://basscat.com/forum/groups/basscatowner/bench-swap-to-buckets-question/#post-673733

]]> 0 bc1515d0f4250ae648cd28344766eb95 02JagCat posted an update: John helped a lot of people, including myself. He will be missed. https://forumtesting.basscat.com/activity/p/17758/ Wed, 02 Jun 2021 14:15:33 -0600 John helped a lot of people, including myself. He will be missed.

]]> 0 ede31764ccd54779a22dbe1e7e5179b9 02JagCat replied to the topic John (Jones Trolling Motors) has passed in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/john-jones-trolling-motors-has-passed/#post-698836 Wed, 02 Jun 2021 14:15:32 -0600 John helped a lot of people, including myself. He will be missed.

]]> 0 f024d676d38897351d50e6ba49f78bd0 02JagCat posted an update: Hope all goes well for you and your wife. https://forumtesting.basscat.com/activity/p/15744/ Mon, 22 Feb 2021 16:49:00 -0600 Hope all goes well for you and your wife.

]]> 0 79b5089ef84bc68e27e80c29b4f9b7ed 02JagCat replied to the topic Prayers for my wife please..... in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/prayers-for-my-wife-please/#post-696650 Mon, 22 Feb 2021 16:48:59 -0600 Hope all goes well for you and your wife.

]]> 0 cf2f3242f28446c3efff734fec6f7568 02JagCat replied to the topic Overheating after shutdown in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/overheating-after-shutdown/#post-696579 Wed, 17 Feb 2021 14:24:27 -0600 My 225 Opti had similar overheating after shutting down. Also had some erratic temps while idling. Water pump was less than 6 months old but when I took things apart I found that the base plate gasket was blown out. Replaced everything and it was good after that.

]]> 0 cf2f3242f28446c3efff734fec6f7568 02JagCat posted an update: My 225 Opti had similar overheating after shutting down. […] https://forumtesting.basscat.com/activity/p/15670/ Wed, 17 Feb 2021 14:24:27 -0600 My 225 Opti had similar overheating after shutting down. Also had some erratic temps while idling. Water pump was less than 6 months old but when I took things apart I found that the base plate gasket was blown out. Replaced everything and it was good after that.

]]> 0 eb8104dc3b8948dbf96445b8a095296d 02JagCat posted an update: First thing to do is make sure your software is up to  […] https://forumtesting.basscat.com/activity/p/9811/ Mon, 20 Apr 2020 12:07:47 -0600 First thing to do is make sure your software is up to  date. Had the same problem with a Helix 7 and it fixed it.

]]> 0 e69890622c39ee3c8bfc961dab353bca 02JagCat replied to the topic Helix issue in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/helix-issue/#post-689170 Mon, 20 Apr 2020 12:07:45 -0600 First thing to do is make sure your software is up to  date. Had the same problem with a Helix 7 and it fixed it.

]]> 0 aafe7a1362119e9092cf0bd1d6e91b6c 02JagCat posted an update: It's some UV resistant plastics I had from work. No stickers […] https://forumtesting.basscat.com/activity/p/8129/ Wed, 12 Feb 2020 17:45:53 -0600 It’s some UV resistant plastics I had from work. No stickers as it’s all laser cut and engraved.

]]> 0 1963470c789db8f5e7616d3f1a20ba51 02JagCat replied to the topic bow face plate in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/bow-face-plate/#post-686063 Wed, 12 Feb 2020 17:45:47 -0600 It’s some UV resistant plastics I had from work. No stickers as it’s all laser cut and engraved.

]]> 0 3b409658630242edf0275684137d5006 02JagCat replied to the topic bow face plate in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/bow-face-plate/#post-686055 Wed, 12 Feb 2020 15:18:06 -0600 Assuming yours is the same, I asked a while back about new bow panels for my 02 Jag and was told to talk to Richard, as he might know of some older style panels stashed somewhere.  Decided to just go ahead and make my own instead.

]]> 0 b6b6a6faf945326f3a1a220fa7f18b3c 02JagCat posted an update: Maybe some flexible dryer vent from one of the big box stores? https://forumtesting.basscat.com/activity/p/7422/ Wed, 22 Jan 2020 11:53:22 -0600 Maybe some flexible dryer vent from one of the big box stores?

]]> 0 0af9bfec3ea8a4ec615b74e455769e56 02JagCat replied to the topic vent hose? in the forum Bass Cat Boats https://basscat.com/forum/groups/basscatowner/vent-hose/#post-683774 Wed, 22 Jan 2020 11:53:13 -0600 Maybe some flexible dryer vent from one of the big box stores?

]]> 0 cb04e22456e071a4bfde1577398f95c9 02JagCat posted an update: Best of luck to you, John. You've been a great asset to the […] https://forumtesting.basscat.com/activity/p/4844/ Wed, 16 Oct 2019 11:23:32 -0600 Best of luck to you, John. You’ve been a great asset to the BCB family and many others, including myself.

 

Curt

]]> 0 681888462d582a64629282fda3609223 02JagCat posted an update: A 2004 could be tapped in behind the front panel. May have […] https://forumtesting.basscat.com/activity/p/3431/ Tue, 18 Jun 2019 11:14:44 -0600 A 2004 could be tapped in behind the front panel. May have blown the inline fuse there.

]]> 0 627425ffdc5a2f6d21568d44c7fe0c25 02JagCat posted an update: Unless you can reach behind it you're going to have to […] https://forumtesting.basscat.com/activity/p/3430/ Tue, 18 Jun 2019 11:11:38 -0600 Unless you can reach behind it you’re going to have to remove the panel. The switch is held in by plastic tabs on the backside of the switch. Compress them and it will pop out.

]]> 0 963853ecd33d4a1046b061443f36262f 02JagCat posted an update: Sounds like debris holding one of the stats open. https://forumtesting.basscat.com/activity/p/2747/ Mon, 29 Apr 2019 11:10:21 -0600 Sounds like debris holding one of the stats open.

]]> 0 d45f64f7482008bf8807a82aab6cf2c3 02JagCat posted an update: OK, so I have a little follow-up on this. Richard called me […] https://forumtesting.basscat.com/activity/p/2652/ Thu, 18 Apr 2019 14:20:19 -0600 OK, so I have a little follow-up on this. Richard called me this morning and pointed out that I only need the sheet metal screws and can disregard the machine screws and inserts since I don’t have a removable seat pan. One screw through each hinge and a screw in each back corner. Knew it had to be uncomplicated but the extra hardware made me…Read more

]]> 0 cb2547634fc52fb8b73fed2f70f35510 02JagCat posted an update: Pull the cartridges out and make sure they're not locked up, […] https://forumtesting.basscat.com/activity/p/1311/ Tue, 05 Feb 2019 15:18:38 -0600 Pull the cartridges out and make sure they’re not locked up, or at least check to see if you’re getting voltage to the pumps.

]]> 0