Owner's Board

2012 Puma ftd pump in/out,areator,recirculate stop working

This topic has 2 replies, 2 voices, and was last updated 12 years, 1 month ago by Bass Cat Boats.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
May 4, 2014 at 5:15 pm #310520

grimmjsg
Participant

2012 puma ftd pump in/out, aereator and recirculater. Stopped working. The buttons on the dash light up and I can here what sounds to bethe relay kicking on when I push each button .The horn does work. The lid light for bilge works and the depth finder is working . Any ideas how to troubleshoot and correct ?Last edited by grimmjsg on May 4th, 2014, 5:50 pm, edited 1 time in total.

May 4, 2014 at 8:37 pm #310529

Bass Cat Boats
Keymaster

I would check your wires from the panel to the pumps sounds like something could have pulled loose also if you have an extra pump swap it out see if it works.

May 5, 2014 at 4:30 am #310537

Bass Cat Boats
Keymaster

These are separate panels and we doubt both failed simultaneously. The pump in and pump out is on one panel and everything is separate on the other panel. If they are clicking and have outgoing power with a voltmeter we would check the grounds in the sump on the terminal strip located on the upper transom behind the cranking battery.It sounds like a ground in the rear hatch area.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats