95 Eyra Livewell/Top Cap issues

This topic has 5 replies, 2 voices, and was last updated 17 years, 9 months ago by Bass Cat Boats.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
August 26, 2008 at 1:51 am #339124

bassman3006
Participant

I have 3 questions. First is the livewell system. This weekend my livewell would not fill past the recirculator screen. It has the “Push to Fill” under the key. I am assuming it is a valve issue. If you believe it is, I wonder what the part would be to fix it. Second on the front of the boat “trolling motor mount side”, the rub rail is quite loose, and you can pull it out a bit and it appears that there is a rivet or something loose. What and how do you recommend fixing something like that. Third is the horn. It has power to it. It will even make a bit of a buzz, but it is shot. Do you have replacements for my rig? This boat is awesome and I wouldnt trade for anything less than an 07 Pantera Classic with a Merc 200 Opti and a swing away tongue….that will be the next rig. Thanks guys for building the best rigs on the planet!Eric

August 26, 2008 at 2:30 am #339138

Bass Cat Boats
Keymaster

Hello and welcome to the family. I have a 96 Eyra that I bought last year, great boats and are a rare find. A lot of the looks and development in todays Cats got their start with the Eyra. Probably would be best to call the factory and talk with Scott or Bobby in Parts, let them know what is going on and what you may need. The horn and valve should not be much of a problem. With the aerator and freshwater pump on, does it fill above the drain at the bottom? The molding may need to be replaced or possibly reconnected. Likely someone bumped a dock or bounced on just the right spot. Good luck and post some pictures soon.96 Eyra/12 Mercury 175 Pro XS with 2015 single axle trailer2017 Victory Gunner

August 26, 2008 at 3:33 am #339156

Bass Cat Boats
Keymaster

The valve maybe shot though often on the older models it is a loose end clamp where the cable stop shroud mounts to the valve. The horn you will have to verify with parts on, though we think they dug up some old stock today on those. The rub rail probably took a shot (impact) from something and will require new rivets. Get those from parts as they are a hard to find grip range.

August 26, 2008 at 3:34 pm #339174

bassman3006
Participant

If you can confirm stock, or have “retro-fit?” model if you could post a link to the part and I will pick it up. I will also check the valve issue. Thanks for the prompt info as usual!!! Eric

August 26, 2008 at 3:47 pm #339191

Bass Cat Boats
Keymaster

Call the factory at 870-481-5135 to check or email [url=mailto:[email protected]][email protected][/url] . There are a couple of people that post for BCB that may not be at the factory to give more detail, so it is better to call or email.96 Eyra/12 Mercury 175 Pro XS with 2015 single axle trailer2017 Victory Gunner

August 26, 2008 at 8:06 pm #339207

Bass Cat Boats
Keymaster

jignpig got it right, please contact the factory direct. The Parts desk does not always answer these posts and they tend to stay pretty busy. Plus your inquiry is best handled on the phone as there are differences. BCB
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic. Login Register