Owner's Board

A-10 Touch Pad

This topic has 4 replies, 4 voices, and was last updated 6 years, 4 months ago by JEH in La.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
January 20, 2020 at 5:58 pm #683464

Cassbass
Participant

Hey guys, my A-10 will not turn on the any of the livewell pumps, bilge pump, and the rear navigation lights. It will turn on the front nav light and horn? The round touch pad on the other side of the wheel won’t work either.

This touch pad was just replaced 2 months ago due to my other one failing after 8 years. It was not the same issue as it’s having now.

Does this sound like a touch pad issue to y’all or something else?

Boat is a 2011 P2

Thanks in advance,

Cass

January 21, 2020 at 4:45 am #683530

Bass Cat Boats
Keymaster

Unplug and reboot it.

January 21, 2020 at 5:44 am #683545

Redngoo
Participant

Be sure and check all connections at the terminal block at the back of the boat. Connections issues at this location causes some mysterious issues!

January 21, 2020 at 6:15 pm #683657

Cassbass
Participant

Bass Cat Boats:

Unplug and reboot it.

I tried that yesterday, but no luck.

January 22, 2020 at 6:38 pm #683905

JEH in La
Participant

Cassbass:

Bass Cat Boats:

Unplug and reboot it.

I tried that yesterday, but no luck.

Cassbass, do as Redngoo says and check your power/ground terminal strip on the transom. Reach in and “pull” on each wire to see if one comes out in your hand. Look for loose contact or rust on the screws or terminals. Pay particular attention to the red “jumper” for the power.
This simple exercise has solved problems in the past.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats