Topic: Accu Cull Culling System

This topic has 6 replies, 5 voices, and was last updated 10 years ago by bigkahuna71.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
May 23, 2016 at 2:40 pm #389780

BassTboyle
Participant

I am interested in the Accu Cull culling system. I have a 2005 cougar FTD. Does anyone have experience mounting this system underneath the livewell lid? Does it fit? Instructions say that if the livewell lid has insulation, remove a 4 1/2″ x 8 1/4″ section to allow room to mount the Accu-Culls cradle securely to the lid. My livewell lids have insulation, which I like. But, I am not sure if I really want to remove insulation. Instructions say to eventually apply tape to the cradle and then apply the cradle to the livewell lid. I was curious if anyone has experience mounting this and would it work easily right out of the package without removing insulation on my livewell lids? Thanks.

May 23, 2016 at 3:25 pm #389785

VA FTD
Participant

Dont know what your budget is, but I have been using the Cul M Rite scale since it came out and been very happy with it. Nothing to mount just a scale that assignees a color tag to fish and will quickly cull after you have you limit

May 23, 2016 at 4:21 pm #389788

Basscatbates
Participant

I used the Cul M Rite and really liked it at first… over time it started having issues… sent it back twice and they said it was just the battery. Finally voided the warranty and tried to change the battery myself. Hasnt worked since. I have had my eye on the Accu Cull system for the Sabre…..

May 24, 2016 at 4:28 pm #389791

jboswell
Participant

I use the Accu Cull, works good… I just keep the counter board in my mid seat storage box because I (like you) did not want to cut my insulation..

May 25, 2016 at 1:01 am #389794

bigkahuna71
Participant

I use the accucull also but didnt mount under the lid either. I usually leave it inside the grab bar under the port seat. Not only didnt want to cut the insulation but figured I didnt want to have to have the lid open to fool with it and maybe let one jump out. Have another brand of clips but recently got their scale also and like it so far.

May 25, 2016 at 4:45 pm #389796

BassTboyle
Participant

Thanks for the responses. I also realized that the counter board most likely would fit underneat the livewell lid. So I have seen guys install them under their larger tackle storage compartments underneath that lid. But again, there is insulation. I may just purchase it and not mount it right away and see how I like it just lose in storage. Still seems to serve the same purpose.

May 25, 2016 at 10:55 pm #389799

bigkahuna71
Participant

It should be fine loose. It takes more than a little nudge to change the numbers on that board and the dials are pretty well protected/recessed also.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic. Login Register