Topic: Any kit for electrical for 96 Pantera Classic?

This topic has 2 replies, 3 voices, and was last updated 17 years, 2 months ago by WVBassCat.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
March 28, 2009 at 3:24 am #327800

Gary911
Participant

Was wondering if you have a kit or suggestion for total rewire for my BCB. Not major problems but would like to upgrade the electrical and perhaps the livewell control system and upgrade guages….boat lights and LED trailer lights if the new ones fit in existing mounts, holes etc….may be to much of a project to be worth the cost, let me know if you have any suggestion, will be at the Invitational also. Thanks, Gary

March 28, 2009 at 2:53 pm #327819

Bass Cat Boats
Keymaster

That is a pretty good project, and one we dont think you usually need. Unless someone has cannibalized the set up. We would usually suggest just cleaning up what you have. There are three systems in a boat, one for the engine harness, one for the troller and the main boat harness. This make rewiring a bit much. BCB

March 30, 2009 at 6:19 pm #327849

WVBassCat
Participant

Gary, Im closing in on finishing my 96 PII up. I took on that same project you are looking at. I was going to replace all wiring, but you can test it out with a voltmeter and that will tell you if the wire is good or not. Most of mine was pumps/switch problems. Most all my wire tested out good! All Im waiting on now is my new dash, and to replace a few two way switches. I will stay when you start into this project be patient. And it helps if you have some help when you go testing out wires. let me know if you have any questions I can try to help. Good luck, Steve
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic. Login Register