Topic: Bow protection around the eye?BCB?

Bow protection around the eye?BCB?

This topic has 9 replies, 9 voices, and was last updated 20 years ago by cgp.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
May 26, 2006 at 10:11 pm #437145

Turbo2000
Participant

Does BC make a stainless steel piece to go on the bow to protect the boat from scrathces/scrapes? I missed the the roller this afternoon and scraped the crap out of the bow. I have an 05 Sabre … love the boat! Just dont want to miss that roller again!!

May 27, 2006 at 3:47 am #437146

clownshoes
Participant

I wonder if the black one scratches less or more than my yellow one. Heck I can get the color off but the scratches are a bummer. Hanging upside down while cranking on the nose of my p4 with Meguiars #2 is tough when it 95 degrees out.C.O.D. Jr. III

May 27, 2006 at 11:49 am #437147

Guest
Participant

Ive had both the yellow and black rollers. The black does leave streaks but the yellow cuts the gelcoat off. Id rather buff the black marks out.

Thanks

May 27, 2006 at 1:24 pm #437148

cgp
Participant

Ive also scratched my p 4 with the yellow one.The bow will get in between the rollers easier than the black; if your off a little.Im going back to the black and keep wiping.cg

May 27, 2006 at 2:41 pm #437149

jignpig
Participant

I had both on my PII, and it had a white hull. It originally had a black roller, and I had a lot of black marks.
I finally went to a yellow roller and problem solved. NEVER had scrapes or gelcoat damage.
But the yellow roller I used was the Stoltz Super Bow Roller.
It is a little bigger than other yellow rollers and is more of a clear yellow.
Just my experiences………..

…………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

1996 Eyra/2012 Mercury 175 Pro XS with 2015 single axle trailer
2017 Victory Gunner

May 27, 2006 at 6:17 pm #437150

BluePlate
Participant

I have been using the brighter yellow roller. It is softer and will needs to be replaced about once a year due to getting worn down but it leaves no marks and does not scratch the gelcoat.

I know BCB has went back to the black ones due to scratching on the bow front from the yellow ones. But if you keep the yellow ones clean, I have had no problems.

RWP

May 27, 2006 at 11:10 pm #437151

basschaser
Participant

After getting the trailer a little to deep on my 99 Classic and getting the boat between the inner and outer roller and chipping out the gel coat I had to come up with a solution for my stupidity

I took the outside black rollers off and cut them and recessed them enough the trailer frame fits in them, obviously they won’t turn now but I don’t have to worry about getting inbetween the rollers.

I also found the yellow roller residue was harder to get off the boat and went back with the black one.

Judd Lasiter

May 28, 2006 at 12:24 am #437152

hookset10s
Participant

I have an 04 Cougar that came with the Stolz roller.

I’m convinced that the residue from the roller is because it doesn’t turn as tbe bow rides up. If the roller was a couple of hairs thinner it would turn as the bow rode up reducing if not eliminating residue.

But I have never gotten any scratchs, just residue.

I found the easiest way to rub the residue off is with Acetone dapped on a clean rag.

May 28, 2006 at 12:31 am #437153

RobShaw
Participant

hookset has come to the same conclusion as I. Ive thrown away the original yellow roller on my Puma and have resolved the issue.

May 28, 2006 at 1:35 am #437154

cgp
Participant

yep;
I’m gonna do want judd did .
if ya back down just a little too much..lookout
you can get your bow in between the rollers very easy.

i’m taken my outside rollers off tommorrow and do a little
riggin myself
cg
Author

Posts

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic. Login Register