Brakes

This topic has 24 replies, 11 voices, and was last updated 7 years, 11 months ago by captain action.

Viewing 10 posts - 16 through 25 (of 25 total)

← 1 2

Author

Posts
May 3, 2014 at 7:43 pm #460162

captain action
Participant

OK can you go further for me ? what is the caliper specs can i buy them this weekend? Who makes the calipers? are they 1999 kia sephia or only bass cat item? One more hit please!!!! This trailer is only two tears old guys!!!!

May 3, 2014 at 10:24 pm #460163

scubaman154
Participant

i would check at a trailer /RV supply store

May 3, 2014 at 10:54 pm #460164

captain action
Participant

Are the calipers on are trailers the same ones as a 1999 kia sephia? Any buddy please!!!! 2010 puma

May 3, 2014 at 11:13 pm #460165

Dwayne
Participant

http://www.easternmarine.com/ufp-factor … ler-parts/ Hope this helpsPractice Angling CPRCatchPictureRelease2010 PIV 200SHO

May 4, 2014 at 3:35 am #460166

Bass Cat Boats
Keymaster

i do not believecthey are, they are made by UFP but it couldnt hurt to take your caliper to the parts store and compare them

May 4, 2014 at 3:41 am #460167

Bass Cat Boats
Keymaster

http://www.ufpnet.com/http://basscatowners.yuku.com/topic/997 … -referenceThe above is posted in the FAQ section and was copied from the Owners Board.

May 4, 2014 at 3:28 pm #460168

b2customrods
Participant

The calipers are made by UFP. I know this because I have had to replace the whole rotor, hub, and calipers on both sides of my 2011 P4 trailer. My calipers froze up also from rust on the piston. The pads wore down to the metal and tore up the rotor. BCB does sell the whole assembly including the arm that attaches to the axle. It costs around 165.00 per side. My first one was free as it was under warranty but the 2nd one wasnt as I replaced it just a cpl weeks ago. Call service they can help you out!Oh and this was for the no maintenance hubs. The ones you dont have to grease.Builder of fine Bass Fishing RodsReel Bearing and Drag upgrades.B2 Custom RodsBoca Bearings

May 4, 2014 at 4:57 pm #460169

captain action
Participant

THANKS CRODS FOR THE HIT, IVE BEEN EVERY WERE TO GET THESE CALIPERS AND FOUND THEM AT AUTO ZONE. GET BACK TO THE TRAILER AND THE BLEEDER SCREW IS SMALLER ON THE NEW CALIPERS THEN THE ONES ON THE TRAILER. SO YOU CANT PUT THE BLEEDER SCREWS OR THE CROSSOVER BRAKE LINE ON THEM. CAN YOU MAKE OUT THE PAGE BCB SENT ME TO BUY WHAT WE NEED? I SURE CANT. I HOPE THIS HELPS THE NEXT GUY, I”LL SPEND THE REST OF THE DAY GETTING THE FUR BALLS OUT OF MY KITTY. THANKS EVERY ONE FOR YOUR TIME ON THIS. IS THERE ANYTHING WE CAN TRY TO SPRAY ON THE RUBBER SEAL ON THE CALIPERS THAT CAN HELP US? MY NEW MAINTENANCE SCHEDULE ON THE TRAILER IS NOW EVERY 3 MONTHS INSTEAD OF ANNUALLY.

June 20, 2018 at 11:53 pm #337627

Anonymous
Inactive

Can any buddy tell me what model our brake callipers our, went to put new pads on my 2011 trailer and the rubber boot on the pistons are dry roted and full of rust. Even with a Cclamp they wont go in enough to get the new pads on, so I,m replacing with new rotors and calipers and would like to not wait till Monday to order from bass cat, and wait for delivery. Has any buddy bought rotors and callipers from auto. store? Looking for year and model # please. I know the pads are for a 1999 kia sephie , there is no info for rotters on are home page, are the calipers for a 1999 kia sephia the same ones on are trailers or what?. just not enough info. on are home page to be able to move forward and buy from an auto store and install them this weekend, two hour fix and on the water. THANKS !!!!

June 21, 2018 at 12:59 am #337644

1stinLA
Participant

https://www.pacifictrailers.com/collect … et-33016-a
Author

Posts

Viewing 10 posts - 16 through 25 (of 25 total)

← 1 2

You must be logged in to reply to this topic. Login Register