Dash board gauges

[bigfishrmanz]

Purchased a 2000 Jaguar and Im in the process of replacing the superdash with an aluminum plate and the new gauges and decided to try and match the key switch area with another aluminum plate and possibly new gauges there as well. Currently there are three items on the left side, Key switch, water pressure, and the third that Im not sure of the functions. If someone could inform me of exactly what the four areas on the part are for that would be great. Also if this is a BassCat specific part or not so i can see about where to purchase.Last edited by bigfishrmanz on April 24th, 2011, 5:06 pm, edited 2 times in total.

[Bass Cat Boats]

That appears to be an early Mercury warning gauge.

[bigfishrmanz]

Thanks, looked it up and found what all four lights are for. 4 Light Warning Kit – Oil Level, Water Temperature, Water in Fuel and Check Engine. Upon switching from the superdash the following is listed in the conversion kit page. NOTE – This kit will not replace all the features on the Super Dash. You will lose Oil Temp, Engine Temp, Clock, Water Temp, Compass, Barometer, Engine hours, Trip time and distance, Trim and Water Pressure (optional), and any other features not included with the kit above. The ones that Im worried about replacing are oil temp, engine temp, trim and water pressure. As of now the only wiring issues i have upon converting are the oil low, oil high, and engine overheat. Does this Mercury warning unit cover what the superdash did functionally as far as the warnings and buzzers are concerned?

[Author]

Posts