When master power is turned on everything lights up and looks fine, but when I push any button on the a10 dash it simply beeps and will not turn that accessory on. It only started doing this after I removed my onboard charger that quit working. Any ideas as to what could be causing this and what i can do to fix it? Boat is an 07 P4.Any help would be much appreciated.
I would check first to see if you accidently left a wire off the battery, or maybe loosened a ground on the block on the transom. It sounds like a missing or loose connection.
Thanks for the replies, but still not working properly. I have checked connections on transom block, all were clean and tight. Also disconnected touchpad and reconnected, and also replaced breaker at master power. Any other suggestions?
.
