? for bcb

This topic has 34 replies, 12 voices, and was last updated 15 years, 9 months ago by Tideman.

Viewing 15 posts - 1 through 15 (of 35 total)

1 2 3 →

Author

Posts
August 27, 2007 at 1:07 pm #305618

Bass Cat Boats
Keymaster

This pump is located on the lower rear of the iivewell. It should be on a 90 degree mount, with a short hose.It would be rare, though do cross wire another pump from those leads and trace it for power and ground to determine the issue. If it is the panel, we will cut another one out to you. This may be the original issue. BCB

August 27, 2007 at 1:39 pm #305619

jmoore50
Participant

Thanks BCB will check that out tonight.

August 28, 2007 at 12:12 am #305620

Bass Cat Boats
Keymaster

BCB checked out each pump. Ended up pulling wires off from pump out pump and plugging them into the pump in pump. Pump-in pump works fine. Plugged the pump-out pump wires into pump in switch, doesnt work. Pulled the security switch panel and checked plug itself to make sure all contacts where being made. Everything was fine. So the fault is in the security touch pad.When I touch the pump-in switch I can here a distinct click and the lights come on. Checked with a tester and no power out at the plug.

August 28, 2007 at 12:39 am #305621

Bass Cat Boats
Keymaster

Quote:. Ended up pulling wires off from pump out pump and plugging them into the pump in pump. Pump-in pump works fine. Plugged the pump-out pump wires into pump in switch, doesnt work. Pulled the security switch panel and checked plug itself to make sure all contacts where being made. Everything was fine. So the fault is in the security touch pad.The pumps both work on the set of wires that works? From this it sounds like your pump out pump on the back of that livewell does not work in either position? To Make sure we understand each other, you took the wires from the pump that does work, and plugged the pump in wires to the pump out pump, then it worked, OR it did not work yet? BCB

August 28, 2007 at 12:42 am #305622

jmoore50
Participant

Didnt work when I plugged the pump-in wires into the pump-out pump.

January 31, 2008 at 2:40 am #268853

1bigbite
Participant

My brother had to drop out of the OI, He is getting ready to go to Afganistan and has to attend NGD. Who do I need to call or can I just change it at registration? Thanks for the help

January 31, 2008 at 4:49 am #268854

Bass Cat Boats
Keymaster

Something does not sound right here. The holes should be in the glass parts for the tubes and the grommets installed. Drop Service an e mail and we will front them on this.

January 31, 2008 at 7:14 pm #268855

BassArkie
Participant

BCB, Do you have any pictures of these rod organizers for the drivers side? I have a 2006 Puma and would be interested in the organizer and the cost. I assume they are for “do it yourself” folks. Billy

February 1, 2008 at 1:10 am #268856

1bigbite
Participant

Below are links to the rod organizer I was sent from Basscat. http://i268.photobucket.com/albums/jj35 … ocker2.jpg http://i268.photobucket.com/albums/jj35 … ocker3.jpg http://i268.photobucket.com/albums/jj35 … ocker1.jpgLast edited by 1bigbite on February 1st, 2008, 1:13 am, edited 1 time in total.

February 1, 2008 at 1:13 am #268857

Bass Cat Boats
Keymaster

I cant find the email for the service department. Can you post it??

February 1, 2008 at 1:24 am #268858

Bass Cat Boats
Keymaster

[email protected] You have most of the right parts but we should have sent you clips instead of the grommets. Email service or give us a call and well get you what you need and go over the installation. Sorry for the confusion. BCB

April 16, 2009 at 5:10 am #462219

Bass Cat Boats
Keymaster

You can call in if you have your partner, and verify it at the registration. It saves time to have this all in order. Thank You, BCB

April 16, 2009 at 5:17 am #462222

Bass Cat Boats
Keymaster

My brother will not make it to Mt. Home, Ark. until mid to late afternoon wednesday. Will this present a problem? I have already sent in our entry form. We are coming from two different destinations and his work will not allow him to arrive any earlier. I should be in town mid morning on Tuesday. Thanks! misr12

April 16, 2009 at 5:25 am #462225

Bass Cat Boats
Keymaster

The registration is ver that evening, and once you sign in, he can show up and bring his release form. You will be fine misr12!

April 16, 2009 at 2:17 pm #462228

Tideman
Participant

BILL, THAT IS A BEAUTIFUL FAMILY YOU HAVE………STILL WISHING YALL THE BEST..ROBIN
Author

Posts

Viewing 15 posts - 1 through 15 (of 35 total)

1 2 3 →

You must be logged in to reply to this topic. Login Register