Owner's Board

NexSysLink Question re trim

This topic has 5 replies, 2 voices, and was last updated 10 years, 11 months ago by Bassm1n.basscatowners.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
July 1, 2015 at 2:36 pm #287638

Bassm1n.basscatowners
Participant

I have a 2012 Eyra. It has and LED readout re trim as part of the NexSysLink system but there is a gauge as well. My question is will the gauge be calibrated via the NexSysLink system calibration along with the leg % trim readout? Also, in recalibrating, you are asked for a source and the options are analog or Can Bus. How do I know which I have?? I assume BCB will know since this was part of the boat package.

July 1, 2015 at 11:32 pm #287639

Bass Cat Boats
Keymaster

http://www.basscat.com/images/NexSysLinkGauges.pdfThis is some light reading on the gauges. You can calibrate it and it is not too hard to figure out by just toggling through the options, and if you cant read the manual and it has extreme detail. BCB

July 2, 2015 at 1:11 pm #287640

Bassm1n.basscatowners
Participant

I already have this manual. The problem is in recalibrating. It asks for whether the gauges are analog or Can Bus. This is what I need to know.

July 2, 2015 at 1:51 pm #287641

Bass Cat Boats
Keymaster

Can bus as I recall. Mine periodically loses its calibration. I wish I could tell you how to calibrate it in a few easy steps, but I have to stumble through it each time.

July 2, 2015 at 2:14 pm #287642

Bass Cat Boats
Keymaster

They are CanBus.

July 2, 2015 at 6:05 pm #287643

Bassm1n.basscatowners
Participant

thank you all.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats