Topic: Oxidation Problem

This topic has 5 replies, 4 voices, and was last updated 13 years, 8 months ago by Ryan2005.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
September 25, 2012 at 3:08 am #377487

Ryan2005
Participant

I have a 2000 Sabre that is in great shape but is starting to show light oxidation on the top cap. The rest of the boat still shines like new. I purchased the Mcguires products light oxidation remover, polish, and wax. Went through the steps with a orbital buffer looks better but still showing a haze on the top. Its not very bad just noticable looking down on it. No chalking or rough patches. Does anyone have any suggesions? Thought of trying the heavy oxidation remover not sure if that will help. I found one video using the Mcguires oxi remover and using a scotch brite pad to scrub off oxidation. Is this recommended or safe? Just dont want to make the gel coat worse or damage it. I believe it can be shined back out without all the wet sanding. Boat still looks great I just want to address the problem before it gets any worse. Any suggestions or personal experience would be greatly appreciated. Thanks

September 25, 2012 at 3:11 am #377489

PhilAddison
Participant

Sounds like your problem can be solved with a buffer and a heavy duty compound. Follow up with a finer abrasivie then wax.

September 25, 2012 at 2:55 pm #377492

socalpIII
Participant

i had heavy oxidation on my 99 PIII when i got it on the top cap and fenders. i bought the Aqua Buff 2000, 1000 and a buffer at harbor freight. cut pads through amazon and it removed and put a shine on the boat!! have not used the 1000 as i just did a quick top job and am very impressed at the gel coat and aquabuff!!!the stuff is messy so be prepared cover anything you dont want to sling the compound on, but well worth it!!http://www.aqua-buff.com/

September 27, 2012 at 12:51 am #377496

Ryan2005
Participant

Thanks for the input guys. Ill give it another shot.

September 27, 2012 at 12:54 am #377499

scubaman154
Participant

Use a regular not orbital buffer, but watch how long you leave in one spot, keep it moving! The buffer at harbor freight is like $29

September 27, 2012 at 2:14 am #377503

Ryan2005
Participant

What type pads should I use with a regular buffer and oxidation remover?
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic. Login Register