Power pole installation Lynx

Tagged: power poles

This topic has 15 replies, 5 voices, and was last updated 7 years, 1 month ago by mike dominick.

Viewing 15 posts - 1 through 15 (of 16 total)

1 2 →

Author

Posts
April 5, 2019 at 5:36 am #673276

jclacy
Participant

Considering installing 2 8 foot blades on lynx. Are pumps being mounted on “shelves/trays” on both sides of bilge? How are hydraulic lines being routed to power poles? I did installation on previous boat but wanted input before starting this project. Thanks in advance.

April 8, 2019 at 10:44 am #673427

mike dominick
Participant

I need to do the same, has anyone put one on each side?

April 8, 2019 at 3:22 pm #673438

mike sanders
Participant

Mine are both mounted on port side from Bass Cat.

April 12, 2019 at 1:53 pm #673534

proptwister
Participant

Just had 10′ poles installed on mine. Both pumps fit nicely in the port side rear compartment.

April 12, 2019 at 2:12 pm #673537

jclacy
Participant

Thanks so much for the replies, guys. One more question: Are the hydraulic lines run a) with thru-hull fittings, b) through existing holes, or c) were new holes cut/drilled? Thanks again.

April 12, 2019 at 6:47 pm #673540

proptwister
Participant

April 12, 2019 at 6:48 pm #673541

proptwister
Participant

Thru hull fitting.

April 12, 2019 at 8:06 pm #673542

jclacy
Participant

Looks great! I really appreciate your effort. The willingness of fellow owners to help others is one of many reasons I returned to Basscat.

April 12, 2019 at 8:26 pm #673543

proptwister
Participant

No problem.

April 15, 2019 at 9:29 am #673623

SixBoss
Participant

Sorry fo the late reply – I did dual 10’s on my Lynx – one per side on the “shelves”. For me I wanted them placed on the side they were associated with in order to prevent adding to the confusion if anything went wrong…. Also used existing holes for the lines. PM me if you would like more details or photos.

Joe

April 20, 2019 at 9:37 pm #673804

mike dominick
Participant

Put mine on today.

April 21, 2019 at 10:10 am #673808

mike dominick
Participant

I drilled high up on the transom and ran the lines through, still need to silicone the bushings and push them in.

April 21, 2019 at 10:11 am #673810

mike dominick
Participant

I put a pump on each side.

April 21, 2019 at 10:13 am #673812

mike dominick
Participant

Foot pedals on the shelf up front

April 22, 2019 at 5:06 pm #673839

jclacy
Participant

Mike,

Thanks so much for being the “guinea pig” on this project. I had decided that holes would have to be drilled but kind of dreaded doing so. Your setup looks sweet and the excellent pics will help tremendously.
Author

Posts