Topic: ProCise Cull Keeper

This topic has 8 replies, 7 voices, and was last updated 7 years, 5 months ago by Bigmike.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
January 4, 2019 at 7:06 am #466189

Carl W
Participant

Has anyone tried this cull keeper? It installs on the under the livewell lids?

Also wondering if anyone has ever installed one on a Pantera IV

January 4, 2019 at 1:26 pm #466190

Cajunhunter67
Participant

I made these out of Aluminum and installed them on my Sabre FTD, and now my PII. I cut the foam insulation off. removed the glue. Scuffed up the surface and used 5 minute epoxy adhesive to attach it to the lid. Works great and no holes drilled in the lid.

January 4, 2019 at 8:01 pm #466191

abarbour
Participant

I actually installed one on the metal divider between the two livewells on my Cougar. I didn’t want to drill holes through my lids. It works great.

January 4, 2019 at 11:24 pm #466192

Carl W
Participant

Thanks. I was nervous to drill holes into the lids as well.

Sent from my iPad using Tapatalk

January 5, 2019 at 5:18 am #466193

Sparker
Participant

I used wire ties to fix mine to the divider.

January 5, 2019 at 7:29 pm #466194

texlacat
Participant

I just hook the open wire clips into the holes of the divider. They don’t come off unless I take them off and I didn’t have to drill holes or attach anything.

January 5, 2019 at 10:10 pm #466195

Caldwellj
Participant

I just leave mine floating in the live well but I like the ideas above

January 6, 2019 at 12:25 pm #466196

texlacat
Participant

On the rare occasion I get to fill up the livewell to actually put fish in there 😂 the tags end up floating off the divider but that’s just as easy

January 10, 2019 at 8:47 pm #468703

Bigmike
Participant

Good idea👍
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic. Login Register