Topic: Prop for a P-III w/ a 200 Yamaha V-Max?

This topic has 2 replies, 3 voices, and was last updated 18 years, 6 months ago by DPT2005.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
December 1, 2007 at 1:56 am #439309

fishmagnet
Participant

Ive been running a Yammie 25M prop on my boat for some time, though with full tanks, tourney partner, gear, and full livewells, my P-III is really a pig getting out of the hole and up on plane. Once we get going, we can fly! Should I try a 24 Tempest Plus for a better holeshot while maybe losing 1-2 mph on top? Or give a different 25 pitch a try? Just curious in Dallas!

December 4, 2007 at 1:55 pm #439310

lawson101
Participant

A 25 M has vent holes usually cut into the prop that goes down in the housing and there is know way of using plugs. I have a 25 tempest been reconditioned by myself runs great. I run a 150 yammi with this prop and ran 62 and have great whole shot. I would like to half $250 this price includes shipping to your door. 101 Prop Service 3586 HWY 101 Gamaliel AR 72537 870 467 5299

December 4, 2007 at 2:36 pm #439311

DPT2005
Participant

I have a 2002 classic with a 200 Yamaha VMax. Ive also been running a 25M prop with good results on my boat. Ive tried a 25 Tempest with the exact same results. The tempest provided no benefit over the 25M. Ive also tried a 25 Trophy. The 25 Trophy does improve holeshot significantly, but runs about 1-2 mph slower on top end. The 24 pitch tempest or trophy might help, but its just a personal preference. Oh, if you decide on the Trophy prop, you should probably get the blow out ring also. Without the blowout ring, I had significant problems with blowout while trying to come out of the hole. With the blowout ring, holeshot is great. Hope that helps. KentKent Charles 2002 Pantera Classic & 200 Yamaha VMax
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic. Login Register