Owner's Board

Puma FTD-250 SHO-Atlas jackplate……

This topic has 4 replies, 4 voices, and was last updated 8 years, 3 months ago by Elwood.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
February 13, 2018 at 1:55 pm #345042

Tom W
Participant

I have a 2016 Puma FTD with a Yamaha 250 SHO and Atlas jackplate. I have been running the Atlas with the setting on 3 which seems to a good overall setting.Does anyone have experience with this combination and if so what have you found the best setting for the Atlas?Thanks in advance…

February 13, 2018 at 5:34 pm #345053

lsav
Participant

I have a 2016 Puma FTD with a 250 SHO and Atlas JP I run mine on 3 with the only exception being if I have to get on pad fast in shallow water with a heavy load.

February 14, 2018 at 11:02 pm #345066

Elwood
Participant

I have a Eyra with a 250 SHO and it runs best at 8 – 10 on normal runs and if I want to max the speed I will bump it up to 12-13. I have never run mine that low and did not realize that there would be that much difference between the hulls…..interesting

February 15, 2018 at 3:14 am #345086

skennedy
Participant

Im running a puma same set up . 8-10 10 top end with my three blade . I have never ran mine that low either . I just went out to the shop to confirm my set up . At setting 5 Im at 3″ below pad . At 8 Im at 2.25 to 2″ at 10 Im at 1.5 plus or minus an 1/8″ . At a setting of 3 your like 3.5 to 4″ below pad . If your running a Yamaha prop thats to deep . Thats like fury prop deep .

February 15, 2018 at 1:30 pm #345100

Elwood
Participant

I am running a 26 pitch T2 SHO prop on my Eyra.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats