Rod box lights 97 Jaguar

We suspect either the power from the junction strip on the transom or the power out of the BP- dash.

You manual has a wiring schematic which will indicates which wire is the feed to the lights. Trace that with a voltmeter and see if you have power there. If not, then they may have missed something on the rebuild when checking it out on final.

Most of these are usually ground related. If that helps any?

BCB

Sounds like the unit is making the connection, though outgoing power needs to be checked. It sounds to us like there is a unit problem since the refurb, that the power supply is not providing positive current.

Though it seems that the unit is getting a communication.

The ground activates the lights, and is monitored by the unit for the SS system to work.

There should always be a hot positive (+) in the boxes to the lights. That is where we would check first.

Good Luck!

BCB

You will have to place it in the harness to the cannon AMP plug and back of the unit. There is a three (3) wire pig tail coing off the cannon plug which it will plug into. BCB

It must be in the ground itself or the hot wire supply.

We know you voltwmeter is not working, though it will have to be reverse traced.

Otherwise there are too many areas to speculate here.

BCB

Only in that box supposably, unless the wiring has been tweaked trying to repair the system without understanding it is ground oriented.

BCB