Owner's Board

Screw on cover for gas vents

This topic has 4 replies, 4 voices, and was last updated 11 years, 2 months ago by Dawnarizen.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
April 27, 2008 at 9:27 pm #289380

TimTrimpop
Participant

Have a 97 Sabre with screw on gas vent covers.Are the covers still available?

April 28, 2008 at 12:34 am #289381

toledobasser
Participant

Are you talking about the black plastic screw on vent caps? I have a 92 Sabre and mine have “Perko” on them. If that is what you are talking about, I had to buy one for my boat because I lost one. I had to order the whole gas vent assembly because I could not find just the caps. It wasnt very expensive and I figured if I ever need the vent for anything, Ill have it. You may have better luck.Jim EbarbMany, LA (Toledo Bend Lake)2004 Cougar/ 225 OptimaxHumminbird Helix 12 Chirp SI on BalzOut Mount at bowLowrance HDS 7 at bowHumminbird Helix 12 Mega SI on Ram Mount at ConsoleLowrance HDS 8 in dash at console

April 28, 2008 at 2:58 am #289382

Bass Cat Boats
Keymaster

I believe we talking about same thing.They open about 1/2 to 1 turn to vent tanks when gassing up to prevent back pressure.

April 28, 2008 at 2:59 am #289383

Bass Cat Boats
Keymaster

Some marine stores have the cap, though our cost is higher to offer the caps alone. Thus we believe that parts only did offer the complete unit, though that may have changed. It is a Perko part as mentioned above.

March 23, 2015 at 12:40 pm #289384

Dawnarizen
Participant

I too have lost both my caps. I would like to know what size they are so I can replace them.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic. Login Register

© 2026 Bass Cat Boats