Soft spot in floor

This topic has 8 replies, 3 voices, and was last updated 14 years, 11 months ago by Mcvoan.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
July 11, 2011 at 10:52 pm #408145

Mcvoan
Participant

i have a soft spot in my floor who do i need to call about this its a 1997 PII and i am going to try to make it last as long as i can when i bought it from the previous owner i knew about it but i thought it would last a bit longer so any help i would greatly appreciate it . thanks so much

July 12, 2011 at 12:07 am #408146

Bass Cat Boats
Keymaster

There are three primary areas that fatigue. One to the left behind the console leg where the drivers left foot places when he stands, just right of the floor drain. The left side of the floor next to the rod box. And the right front of the floor right of the floor drain against the front deck. If those are soft then you should service and repair those as the fatigue could lead to further damage if it hasnt already.

July 12, 2011 at 1:20 am #408148

Bass Cat Boats
Keymaster

who can i get to do this ?? anyone you can recommend ??

July 12, 2011 at 2:44 am #408150

Bass Cat Boats
Keymaster

Location?

July 12, 2011 at 3:35 am #408152

Bass Cat Boats
Keymaster

His profile indicates Glenwood, Arkansas. Maybe someone in Hot Springs could help?96 Eyra/12 Mercury 175 Pro XS with 2015 single axle trailer2017 Victory Gunner

July 12, 2011 at 3:37 am #408154

Bass Cat Boats
Keymaster

There is a shop down south of Hot Springs that was reasonable. Gwinn Boat Repair has the contact info.

July 12, 2011 at 2:50 pm #408157

Mcvoan
Participant

yes that is right but i would drive a ways if i can get it right I guess you dont do these type of repairs at Mt Home ?? I want somebody that is going to do it right Because i have allready updated my boat and this is the last thing i need to get done and i plan on keeping it for a while . My wife says Buy a new one and trade mine in but i really like my PII and the only thing i would want is a Cougar . I would like the Wider Beam width But i can live with the smaller one . Thanks For all your help And thanks Jignpig for letting them know where i am . BCB is just the best as far as i am concerned

July 12, 2011 at 4:55 pm #408159

jignpig
Participant

There are some at the factory that do some side work at home. One is Garry Wright. You could call the factory and see if you can get some recommendations. I know Doug Swann and others can probably get you some numbers on those glass guys up there.Dont blame you one bit. After doing a refurb, might as well make is right all around!Just another example of how beneficial “profiles” can be…. Good luck!96 Eyra/12 Mercury 175 Pro XS with 2015 single axle trailer2017 Victory Gunner

July 12, 2011 at 5:04 pm #408161

Mcvoan
Participant

thanks ill do that and see what i can get done !! yes your right since i have went this far i dont want any body doing it that is not familiar with Bass cat i called one guy and he said yes he can but he would have to look at it and see how a bass cat is put together and he claimed he had 30+ years experience . So i just want it done right is all and by someone that knows what to do . Thanks again
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic. Login Register