Tackle Trays

This topic has 8 replies, 7 voices, and was last updated 14 years, 2 months ago by skeeter Jim.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
February 18, 2009 at 11:03 pm #454343

Bass Cat Boats
Keymaster

round compartment is for your boat registration.

February 18, 2009 at 11:25 pm #454344

Bass Cat Boats
Keymaster

Jim, You may have to bounce that up to the Yuku Help desk for your screen name change. There was a tab for this on the EZ Board system, though we are not sure about Yuku. Which is where this board is located. The round compartment is for your registration and insurance. The storage boxes you will have to wedge out, they are put down with urethane Windshield adhesive and it is some tough stuff. Dont ever hesitate to ask a question here. BCB

February 18, 2009 at 11:42 pm #454345

Gary Hollander
Participant

Jim, I use Falcon FTO boxes which are narrower on certain models; I removed one or more of the dividers in the tackle-trays to get my boxes to line up. The dividers are glued in, and will come out pretty easily with a little “encouragement”. Push to the left or right and they will evidentually break fee at the top and bottom, You can then push them back and forth until the glue on the bottom of the divider lets go. This allows you to retain the tray bottom and strap. I have had as many as 7-9 FTOs in one tray. I have re-gluded them when I have sold boats in the past and they have worked well when re-installed… Good luck, Gary Hollander

February 19, 2009 at 12:41 am #454346

Charcoal Puma
Participant

you might also try taking string, floss or fishing line and getting underneath and “sawing” through the adheasive (sp) if there is enough room. We do that a lot on car/truck emblems. Ive also used “safety wire but you have to be carefull with it so it doesnt scratch, the wire is used more for cutting adheasive on windshields

February 19, 2009 at 1:13 am #454347

skeeter Jim
Participant

took your advise and it worked fine. Dans idea would have worked to I think but Im good now

April 9, 2012 at 12:44 pm #271619

mach316
Participant

First, how do I change my screen name? Second, brought home the new puma yesterday and I have a question about the tackle storage trays up front. They simply will not work for me so I want to take them out. Anyone ever done this and they appear to be glued down and I assume I have to pry them off. The storage boxes I use are two sided and do not fit. Also, what the heck is the little round compartment for in the right front storage box? thanks

April 9, 2012 at 3:49 pm #271620

Bass Cat Boats
Keymaster

They do fit the 3700 series and the thicker box also, though we dont recall that number. BCB

April 9, 2012 at 4:19 pm #271621

ischnell
Participant

I must add a word of caution here I recieved 2 of these trays and the 3700 series were and are a very tight fit to the point where some of the glued joints have let go. The web site suggests that this tray was designed for the 3600 series ( I missed that when I ordered). The 3600 series are narrower by a 1/4″and that would make a world of difference.Irv

April 9, 2012 at 4:48 pm #271622

socalpIII
Participant

I use 2 of these:http://www.tacklewarehous…ack/descpage-OFUBWR.htmlin the front storage box of my PIII. siliconed them in and you can stand 2 3600s in one slot. they can fit snug by just bending the wire closer.
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic. Login Register