This will answer some questions some have had. It worked great.. I need a 4 position remote though.. brackets fit fine things appear to work well. My only input might be a better option for running the wires and that can get tricky with a Hydraulic Jackplate as well.There is plenty of clearance for the boarding ladder.. only other concern is if I put my plate all the way down and then set the Talons at 4 inches above pad there is not much Talon left in the bracket but I could use the other set of holes if I see an issue and gain an inch. Also brackets do seem to bounce a bit but this weekend we will see how they affect performance.. Anyone have any suggestions on changes I might have to make for take off and running? Moving some things off the boat and other things up to the front to balance weight that I added.. I did a shut off at the battery to be sure to eliminate any draw of the battery while sitting.. I also want to thank John at Jones for getting me all of this as quickly as possible. He was helpful through the whole process. Last edited by Mark5795 on June 13th, 2014, 9:51 am, edited 1 time in total.
.
