Trailer parts

This topic has 11 replies, 5 voices, and was last updated 9 years, 1 month ago by Bass Cat Boats.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
February 20, 2008 at 9:28 pm #459562

Bass Cat Boats
Keymaster

It is all available from [email protected]. Much of it is list in the store links above. BCB

February 20, 2008 at 9:32 pm #459563

Bass Cat Boats
Keymaster

Yeah, the Parts link at the top of the page is where I found the rebuild kit. Just wondered if the break away cable was available since it wasnt in the parts list. [email protected] is their e-mail address right? Thanks

February 20, 2008 at 9:38 pm #459564

Bass Cat Boats
Keymaster

Yes

December 9, 2008 at 1:03 am #277508

1MANSHOWW
Participant

Thinking about getting the hydraulic brake rebuild kit with the master and wheel cylinders, bearings and brake shoes. Do the parts folks have the break away cable and push rod kit available?

December 9, 2008 at 1:15 am #277509

Bass Cat Boats
Keymaster

I would get a complete hub assembly….easy to change out rather than fooling with bearings while on the road…and pads….not likely to blow out a pad though…havent heard of that problem on trailer..Would get some spare lights as well they are easy to R&R….Maybe a spare bow roller…and a trailer plug and an emergency brake cable…that ought to fix you upCpt.Gary Harlan (Harlo) USCG Liscd Fishing Guide Tishomingo, MS Roger Stegalls Professional Guide Service Sponsors: BassCat (of course!), Strike King, Falcon Graphite Rods, Gary Yammamoto Custom Baits

December 9, 2008 at 2:42 am #277510

Bass Cat Boats
Keymaster

The bearings and seals are all you should need to refurb those hubs. The discs are another item you may or may not need. We doubt they are due yet. In a few years check the fluid for rust, and if it is rusty, then replace the brake lines. You will probably be due a master cylinder rebuild then also. BCB

March 24, 2015 at 6:13 am #289288

Bass Cat Boats
Keymaster

http://www.basscatstore.com/trailer.aspx

March 24, 2015 at 4:37 pm #289289

champion jon
Participant

None of the parts I mentioned are on the page that you linked I checked that before I posted. I will get to a trailer shop this week. I just thought I would start here.Last edited by champion jon on March 25th, 2015, 4:15 am, edited 1 time in total.

March 26, 2015 at 12:20 am #289290

Old Classic
Participant

I bet if you were to call parts, thay will every thing you need. Now shipping another ?.

May 10, 2017 at 12:07 pm #277511

Bass Cat Boats
Keymaster

I noticed I only have 1 brake setup (caliper, rotor,pads) on the rear axle on the left side..I have brake lines on that side that seem to be cut and then the brake line from the right side to the left look to be cut as well..on the right side, there is a T with the line from left side coming over..another line (with rubber hose) that is cut..and then main line to the front that is cut as well before the tongue of trailer…should there be another brake setup on the right side and what does it mean by vault/no vault?

May 10, 2017 at 12:21 pm #277512

Bass Cat Boats
Keymaster

Yes and it has been removed either from a failure, brake line hung and broken, or a caliper issue.

May 10, 2017 at 3:26 pm #277513

oldtimer57
Participant

vault / no-vault simply means do you have a bearing buddy type hub or the vault type hub?2008 Pantera Classic2014 Mercury Pro XS 200
Author

Posts

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic. Login Register