This is not to stir the pot on current issues. Ive been shopping for a unit to replace the LCX-15 in the dash of my 04 Cougar FTD. Which Hummingbird units will fit in the same hole without cutting? Thanks, Ed
Probably none without a backing. The LCX 15 is a taller unit than the 900 series HB and a wider unit than the taller HB units. A back plate should not be hard to find or figure out though. Good luck!
Probably not bad at all. Just depends on what you use. Personally I would look at getting some aluminum plate, curved corners, black, and glue it on with that bad azz glue BCB uses.
I did it on my last Puma. I cut the hole out of the dash and used a piece of black rubber to fill in the gap at the bottom of the unit. It looked great and you could not even tell. It was kinda like a gasket. I work for a flooring distributor and I used a piece of rubber wall base and cut it to fit. Just an idea.. Sorry I dont have any pics.
Author
Posts
Viewing 8 posts - 1 through 8 (of 8 total)
You must be logged in to reply to this topic. LoginRegister