[WMFisher]

Id love to see any photos you may have. Im curious to what I might find under there. maelyx at gmail . com

[WMFisher]

Email Sent

[WMFisher]

I cut the deck last night, and removed the foam that is in there to fit my new tray, but Im curious as to where the drain hose should wind up? I noticed up in the front, there is a glassed in hose about 3/4″ , with a wire running down it. Does the drain plug go from my heel, to the forward drain hole (say if water went in by the control panel in the front.), or is there a different tube, further back, toward the compartments that I should be excavating for through the foam?Hope that makes sense!

[WMFisher]

Thanks Toledo, Found Frank on BBC, sent me some great shots, with a great idea… Thanks to all for helping out! Mark

[WMFisher]

Thanks Gentlemen! Yeah it happened probably 5-8 times now, as it can be a long way back to the ramp on electric only ramps, so I was pushing it as close as I could as the storm was coming. Funny as other boats had the same idea, and kept watching me start coasting with no juice, run to the back, reset the breaker, start up, and repeat.I will definitely replace both with 50Amp breakers and be done with it.Figured the plug was jumping them together at the plug. Guess I could take a voltmeter to the wires on the deck side of the plug and I should see 24volts. Figured the factory has the best setup even back in 93. Not much has changed in the volt/amp/ electric world since then, although these breakers may need to be replaced.Very happy to be in Cat. 1st glass boat, and cant see myself in another brand… Bought it in Oct 2011, and been great to me!

[WMFisher]

Hi Ed, I am interested in the seats, and live relatively nearby. Please text or call me 610- two four 6- 3901Thanks,Mark

[WMFisher]

I am also thinking about trying to add a 360 to the trolling motor. Bump for this post.

[WMFisher]

This is definitely worth signing up for. The team in Mountain Home doesnt mess around at the end of the year! Thanks again!!

[WMFisher]

No, I only own 1, storing another for my friend.

[WMFisher]

I have a 360 on a Fortrex. I have a custom Aurora Cover, and told them I had a 360 when I ordered mine. It fits perfect. With the Fortrex, you can loosen the clamp to adjust the trolling motor depth, and rotate the head (and consequently the 360 transducer) down (which will lower the head of the motor toward the carpet). This slides my 360 to the right of the TM shaft instead of on top (how I keep it when I’m fishing). I also imagine you could make a stiff foam type support bracket between the TM shaft and the 360 pod , that would have to be removed for fishing, but could be good for trailering, or long bumpy runs.

[WMFisher]

Hi BCB, just following up on the end of the year prizes for the Fantasy Fishing, as I might have missed something on it.

[WMFisher]

I have 1 of these wheels if someone is still looking?

[WMFisher]

I am pretty sure I have the 1 good wheel around somewhere, the one with the crack might be gone. ~Mark

[Author]

Posts