[Bubba]

I too think it is the foot switch. Its on an 05 PIV. 8 years old Im going to try a new switch first. Then go from there. But I am going to talk to someone in the profession before I start changing parts. Lucky for me my father n law owns an electric motor shop.

[Bubba]

I replaced the up button on my bow this summer. Get you some silicone and put a light bead on the top of the acc plate. My button rusted out from water running down behind the plate. Oh yeah its an 05 boat. 9 years before replacing awesome…

[Bubba]

Got them installed an burning.

[Bubba]

I have a grounding problem with mine. They blink for miles after I leave the house. But on long trips it clears up after 6 to ten miles. Do I need a new ball and clean out my receiver of rust. And the tounge where the ball goes. I use to use dielectric grease. It could have a build up in there?

[Bubba]

I purchased a on off on rocker switch for mine. Installed under console. Works great.

[Bubba]

Scubaman is that the yellow cap seen in picture

[Bubba]

I can see it seeping out of the rams.

[Bubba]

looks good!!!!

[Bubba]

i have a couple. the way i did mine was i mounted the strips and ran the pig tails into rod lockers on the bow. i did not want to drill holes into my 10 year old 40,000.00 dollar boat. the lights on the back deck i did the same way but i ran the wires through the drain hole in the gutter of those boxes. ill send you some pictures if youd like.

[Bubba]

Steve 187. Duh!!!! Thanks for your great input. You helped tremendously.

[Bubba]

Red goo mine did not require these.

[Bubba]

On my 99 jag it did the same and one summer I ad thermostats replaced and it still did it. Do you get an alarm? Is your motor a optimax? I know for a fact it will shut itself down before you totally burn it up. Someone here will help you more than I. Im not trying to still your thread, but I have a 05 200 hp EFI Mercury but when I stand on throttle to come out of hole I have a steady alarm as it peaks to fall over on plane. I replaced water pump impeller Friday cause it had been right at 3 years. Carried it out to day and the same problem. Now I can ease it over on plane and no problems. Idle I have 5 psi and 15 when on plane and just easing around 35-45 mph. I had gasket material in the hose from motor to output on cowling. What should I be looking at? New thermostats, poppet valve? Or could it be water in water fuel separator? Again not trying to jack a thread.

[Bubba]

Im going to tell you guys this, if @WarriorRiverTackle says he can get it for you. He can do and will do it. This guy does it cause he wants to help out fellow anglers. I have bought six Diawa TATULAs from him and we meet at his convenience at a gas station. How many folks you know will go out of their way to meet you. He has saved me $$$$ on shipping fees. I recommend this company to anyone looking for a good deal on tackle.

[Bubba]

Fish okra, you got pictures of your boat. No need to apologize we are all friends here.

[Author]

Posts