Owner's Board

CanadianMac

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 21 total)
  • Author
    Posts
  • #455647

    CanadianMac
    Participant

    Thanks for the replies. I bought my Cat at Upper Canada and im in Woodbridge. I should take delivery in early April.

    #294726

    CanadianMac
    Participant

    Does anyone have a picture of a boat wrap for a real estate company they can send me? Thx

    #352903

    CanadianMac
    Participant

    assuming that my dealer ordered a 24 or 25 can you give me an idea on performance thx

    #264560

    CanadianMac
    Participant

    Thanks for the link, does this fit into the front storage compartment on the Classic? A picture would be great.

    #264563

    CanadianMac
    Participant

    Thanks for the compliment. I spent a few hours last week breaking the new Opti in and getting a feel for the boat. Ill be out on Simcoe maybe Sunday putting some more hrs on the engine. Rick Rodo says i should be able to get 75 mph with 2 men and tackle loaded……but i will definitely need time and skill in the cockpit before i try that…haha

    #264565

    CanadianMac
    Participant

    Thanks for taking the trouble to put up those pics. Ive gotta get some of those organizers for my cat.

    #256095

    CanadianMac
    Participant

    the gps worked fine.

    #308029

    CanadianMac
    Participant

    Thx for the quick reply Phil. This is my first bass boat so i had an experienced driver run the boat for me. With him and i in it the best we got was 68 with the engine trimmed all the way it would go and at this speed it started to chine. I read alot of the guys on the board run a 25p Tempest. Is my 26 a bad choice. I believe all of the plugs are in the prop as well.

    #308034

    CanadianMac
    Participant

    Thanks for your replies. So..i should reach full speed with no trim and then start to bump it up slowly until i feel it start to chine and then bump it down slightly to reduce or eliminate the chine.? From here, should this be the max speed of my boat with its current setup? If Im only getting 5500 rpm on an Opti (when the max is 5750) should i then tinker with raising it slightly on the jack plate?These maybe be novice questions…but that what i am. Thx guys.

    #307573

    CanadianMac
    Participant

    Stupid questionj…if that red button is a reset will pro air come on automatically when the aerator is turned on? Thx

    #304070

    CanadianMac
    Participant

    What is the front deck space on the Pantera iv and the Cougar Advantage as compared to the Classic? Thx

    #421388

    CanadianMac
    Participant

    Thanks for your quick replies.

    #421390

    CanadianMac
    Participant

    Will there be one ground wire for all the aerators and bilge..i have looked and can only find 2 wires which run from each.

    #421392

    CanadianMac
    Participant

    Thanks BCB and Phill, i got the problem sorted out

    #412628

    CanadianMac
    Participant

    Frank, i have a 2008 Classic with a 200 hp Optimax which sits on a dual axle trailer with swimg away tongue. The motor has approx 15 hrs. I can send you some pics and all of the options if you like. Good luck. ( i have sent a message to your mailbox as well)

Viewing 15 posts - 1 through 15 (of 21 total)

Skip to toolbar