[Pumahunter]

I use a primer bulb and hose.. slide the hose in prime the bulb and out comes the gas. Question is what and where do you put 25 gallons

[Pumahunter]

just sent a text

[Pumahunter]

thxs. is the board under the battery trays? or does it just butt up to the battery trays? also i assume that board was screwed to the glass?

[Pumahunter]

Wacky riggers never picks up phone and they never responded to a quote request.

[Pumahunter]

have a buyer lined up

[Pumahunter]

like the colorsLast edited by Pumahunter on May 6th, 2017, 1:03 am, edited 1 time in total.

[Pumahunter]

I just bought a bass boat technologies right side mount so that I could put a helix 10 on the dash Im my 09 puma. Havent installed yet but I think its the cleanest look out there. Not cheap though.

[Pumahunter]

Bass boat technologies. Not cheap but very nice and clean setup

[Pumahunter]

thx will check them out

[Pumahunter]

Is this what everyone is talking about?http://www.basscatstore.com/8amppushbut … ker-1.aspx

[Pumahunter]

Thx. The only issue would be interference with the rodlocker door. Is that something you just live with? Its only the 45″. Do I use the anti bounce kickstand to raise it up some to help with clearance?

[Pumahunter]

I have a Y cable with a thru hull transducer as well. so not sure which is reading depth at speed. I would imagine at highspeed it the thru hull that getting the depth reading….

[Pumahunter]

Triton03Vance wrote:I just had one installed on my 14 Cougar/250 Pro XS and it is set to stop right before rigging tube boot hits the top of the transom..it works great and dont have to worry if partner tries to help by putting on motor support and is not watching how high he tilts it up..i highly recommend installing this and the Mercury part # for it is 899625K04..it is about 80 dollars for the module..thanks

[Author]

Posts