If the Flow-Rite valve is installed backwards the livewell will drain when the actuator knob is in the “AUTO” position. Flow-Rite valves are marked with “transom” and “livewell” for ease in determining correct mounting position. Another potential cause of your issue could be the mounting of the cable to both the valve and actuator. If the cable is not mounted to either the valve or actuator correctly this will cause the valve to not function properly. Please check out these links for installation and troubleshooting resources:https://flow-rite.com/sites/all/files/f … =154588728https://flow-rite.com/sites/all/files/f … =119444105https://flow-rite.com/sites/all/files/f … k=52343337https://flow-rite.com/sites/all/files/f … valves.pdf
