[Wade Langston]

I am going to jump in here. Have had some of these same problems and MORE. I am a BASSCAT fan and have had one since ’93 so do not think I don’t know a little of what I am talking about and not trying to bash them at all. Put your loose fire extinguisher in that unfinished box and see what happens when it slides to the front and gets stuck in the wires at the bow. I have photos. The box should be FINISHED or there should be something that blocks items from going in to the hull from that box or water from getting in that box. The bow drain is SUPPOSED to have a drain hose attached to direct it to the hull/bilge. I bet it is disconnected. Boxes leaking. My ’19 is better than the others I have had concerning this. BC needs to up their game on finish and final inspection.

[Wade Langston]

The BC original step and pole was a great idea but time has passed it by. Have a 19 Lynx. I am old and fat and the pole is WAY TOO SHORT to help me get in the boat AND with the graph(s) and TM they are hard to step over. BC, the longer pole would solve most of this. I have contacted Trick step and they need the angle on the support for the roller and the tubing size to give me a quote to make one. Their grab pole is much longer. I do have a little concern about hitting the  Trick step when loading or launching the boat though. BCB, can you help with the angle and the tubing size? AND BCB, make the poles longer on newer models. The expense would be minimal and the help would be great.

[Author]

Posts