[dthweatt]

I can vouch for the condition of this rig and it is CLEAN and runs strong!

[dthweatt]

I see some lookers but no takers……………how bout $150.00 shipped? I need to clean out the garage! Thanks, DT

[dthweatt]

Pete, sent you a PM.

[dthweatt]

Judd, thanks for the nod! You fishing any of the JCO or Media Fork events this year?

[dthweatt]

Ive been involved in the manufacturing of greases and commercial lubricants for over 15 yrs. BE CAREFULL mixing greases! There are many different soaps (thickeners) ie..lithium, lithium complex, aluminum complex, polyurea, calcium sulfunates,bentones etc……… When soaps are mixed a reaction can occur that can cause the grease to run or become hardened. Be sure that the grease you select for wheel bearing carries an NLGI GC-LB as this denotes use in wheel bearings. Stay away from greases containing moly or other solids as these greases are notorious for causing the bearing to slide creating flat spots on the rollers. Greases with excessive tack and ISO base oil viscosities above 220 may cause the bearing to run at hotter than normal temps resulting is premature failures. DO NOT OVER GREASE this will not only blow the seal in your hub but will cause the bearing to overheat. Hope this helps.

[dthweatt]

News paper! It takes fish odor from livewells and ice chests……..its worth a try.

[dthweatt]

Careful of the sawzall ………….a guy in town lost his tackle and had to deal with the damage to the boat. The process is not as noisy as one would think and it can be done in seconds. The best defense is to remove your tackle.

[dthweatt]

Running an 06 Puma 250HPDI with the 27T1 80+ GPS 5800-5900 with tons of lift!

[dthweatt]

Carefull with the Amsoil product as it does not have a TCW-3 approval and could create issues concerning warranty.

[dthweatt]

Candy Apple Red w/ Malibu Red pins.

[Author]

Posts