[abarbour]

Bass Boat Technologies.https://www.bassboattech.com/index.php/ … dual-stack

[abarbour]

They are rock solid. I would highly recommend them.

[abarbour]

I doubled up the hardware that is provided with lock nuts and havent needed to tighten once. I fish Lake Michigan so they have seen some rough water.

[abarbour]

Here is a picture of dual Helix 10’s on the bow of my Cougar using the Bass Boat Technologies mount (they come in single or dual mount). I too would recommend using a backing plate (it comes with it). I did have to cut an access hole under the trolling motor pedal to install.

 

[abarbour]

I actually installed one on the metal divider between the two livewells on my Cougar. I didn’t want to drill holes through my lids. It works great.

[abarbour]

I had the same issue with my 2016 Cougar. I called Basscat and gave them the Hull ID Number and I was sent a new passenger seat bottom at no charge. I am so appreciative of the customer service Basscat provides its owners.

[abarbour]

I actually installed the ratchets that you find on a Ranger Boat. There are two fittings that you bolt to the jackplate and the ratchet comes on and off of the fitting when in use.

[abarbour]

[abarbour]

I cut a 4 inch access hole under the trolling motor to gain access. I then installed an access panel over the hole to gain future access. Very easy install.

 

 

[Author]

Posts