[basscathash]

Earle, I could not find your e-mail address. Mine is [email protected] If you would e-mail me, tell me how much you want for your prop Ill get back in touch with you.

[basscathash]

Does any one know if this prop would fit a 150HP and if it would work wothout turning too many RPMs

[basscathash]

I traded the 26P Tempest back to my dealer for the Trophy.

[basscathash]

I have a 23P Trophy plus that Im guessing would be a great hole shot.

[basscathash]

Id sell it for $250 plus shipping

[basscathash]

I understand both points 1 & 2 but #3 about too large a prop confuses me. My boat blows out just as it breaks over, I let off and hit it again and it hooks up and does fine. It has done this on every prop I have run: 26P & 27P Tempest and 26P Trophy. This is on a 05 Classic with a 05 DFI Yamaha. I thought a larger prop would just bog down.

Brian Hash

[basscathash]

If your not getting proper lubrication then I would have to believe your alarm would sound off. It sounds to me that you are ok but I am no mechanic. Old Timer or Sherm I’m sure can shead some light on your issue.

Brian Hash

[basscathash]

Charcoal fender with grey trailer with pivot tongue. Would like step & grab bar.

[basscathash]

Congradulations to Mike & BCB. Mike, welcome to the family. Looking forward to the coming year seeing you in a BassCat. Good luck and I know you will make us all proud. Looking forward to meeting you at the BassCat Invitational.

Brian Hash

[basscathash]

There are fuses in your truck that are in line with the trailering harness. Check under your hood for the fuse panel and there are fuses in there for the trailer wiring harness. Brian Hash

[basscathash]

Lets see if mine works? I quess it does. How cool is that. Thanks BCB.

[basscathash]

Would one of the bands be “Pantera” . Im not a head banger but I do recall the name of this band. Brian Hash

[basscathash]

You will have to make the hole larger if you go to a 7″ screen unit. I used a roto zip to cut the fiberglass and it cut it easily. Just make sure to use masking tape at the cut out area to reduce chipping. Brian Hash

[basscathash]

What is your asking price and where are you located?

[basscathash]

I have a 05 Classic and dont have the problems you are discribing. I leave the trailer in the water to where the water is almost to the flat top part of the fender ( tandem axel ). I run a Tempest prop and can push the boat on the trailer with ease. I have heard if you run a Trophy it is harder to load. Brian Hash

[Author]

Posts